Trang chủ » Remote I/O Module and Unit » Module RS-485 DCON & Modbus RTU 3 kênh đầu vào RTD ICP DAS M-7033D-G CR

Module RS-485 DCON & Modbus RTU 3 kênh đầu vào RTD ICP DAS M-7033D-G CR

3-ch RTD Input Module with LED Display

Chia sẻ:
Model: M-7033D-G CR
Views: 236

Module RS-485 DCON & Modbus RTU 3 kênh đầu vào RTD ICP DAS M-7033D-G CR

The I-7033 is a 3-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7033 also includes 3000 VDC intra-module isolation, and supports lead resistance elimination for 3/4-wire connections.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7033 I-7033D M-7033 M-7033D
RTD Input
Channels 3
Wiring 2/3/4-wire
Sensor Type Pt100, Pt1000, Ni120
Resolution 16-bit
Accuracy ±0.1%
Sampling Rate 15 Hz
Individual Channel Configuration No
Overvoltage Protection ±25 VDC
Open Wire Detection Yes
3/4-wire RTD Lead
Resistance Elimination
Yes
Resistance Measurement 3.2 kΩ Max.
Models I-7033 I-7033D M-7033 M-7033D
Communication
Interface RS-485
RS-485 Bias Resistor No (An RS-485 master is required to provide the bias.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicator
7-Segment LED Display Yes Yes
Isolation
Intra-Module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±2 kV Contact for each Terminal
EFT (IEC 61000-4-4) ±4 kV to Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.0 W 1.6 W 1.0 W 1.6 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
M-7033D-G     CR 3-ch RTD Input Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
TOP HOME