Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 DCON & Modbus RTU 4 kênh đầu ra tương tự (AO) ICP DAS M-7024L CR

Module RS-485 DCON & Modbus RTU 4 kênh đầu ra tương tự (AO) ICP DAS M-7024L CR

4-ch 12-bit AO Module

Tính năng

Module RS-485 DCON & Modbus RTU 4 kênh đầu ra tương tự (AO) ICP DAS M-7024L CR

• 4-channel Analog Output
• Software Selectable Current or Voltage Output
• Power-on Value Setting
• Safe Value Setting
• 3000 VDC Intra-module Isolation
• Programmable Output Slope
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C

Chia sẻ:
Model: M-7024L CR
Views: 540

Module RS-485 DCON & Modbus RTU 4 kênh đầu ra tương tự (AO) ICP DAS M-7024L CR

The I-7024 is a 14-bit 4-channel analog output module that provides current and voltage outputs. There are options for power-on values and safe values. It features 3000 VDC intra-module isolation. The I-7024R is the same as the I-7024 and provides additional 5-channel digital inputs and 4 KV ESD protection on each terminal. The M-7024/M-7024R support Modbus RTU and DCON protocols and can be configured via software. Their hardware specifications are the same as those of the I-7024/I-7024R.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7024 M-7024 I-7024R M-7024R M-7024L
Analog Output
Output Channels 4
Range Voltage 0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 V,
Current 0 ~ 20 mA, 4 ~ 20 mA
Resolution 14-bit 12-bit
Accuracy 0.1%
DA Output Response Time 10 ms
Open Wire Detection
(for current only)		 –
Channel to Channel Isolation –
Power-on Value Yes
Safe Value Yes
Digital Input
Channels – 5 –
Input Type – Dry Contact (Source) –
Contact Level On Voltage Level – Close to GND –
Off Voltage Level – Open –
Counters Max. Count – 16-bit (65535) –
Max. Input Frequency – 50 Hz –
Min. Pulse Width – 10 ms –
Models I-7024 M-7024 I-7024R M-7024R M-7024L
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON Modbus RTU, DCON DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator –
7-Segment LED Display –
Isolation
Intra-Module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±2 kV Contact for Each Terminal ±4 kV Contact for Each Terminal ±8 kV Contact for Each Terminal
EFT (IEC 61000-4-4) – ±4 kV to Power Line
RS (IEC 61000-4-3) – 5 V/m, 80 MHz ~ 1GHz
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 2.4 W 3.2 W 2.7 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
M-7024L-G     CR 4-ch 12-bit AO Module using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
Data Sheet icon_manual icon_address-3
TOP HOME