Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 DCON & Modbus RTU 8 kênh đầu vào tương tự ICP DAS M-7017R-A5 CR

Module RS-485 DCON & Modbus RTU 8 kênh đầu vào tương tự ICP DAS M-7017R-A5 CR

8-ch High Voltage AI (±50 V, ±150 V) Module with High Voltage Protection

Tính năng

Module RS-485 DCON & Modbus RTU 8 kênh đầu vào tương tự ICP DAS M-7017R-A5 CR


• High Voltage Input
• Adjustable Sampling Rate
• 4 kV ESD Protection
• 3000 VDC Intra-module Isolation
• Dual Watchdog
• RoHS Compliance
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: M-7017R-A5 CR
Views: 443

Module RS-485 DCON & Modbus RTU 8 kênh đầu vào tương tự ICP DAS M-7017R-A5 CR

The I-7017R is an 8-channel analog input module with an extremely high quality protection mechanism where the overvoltage protection is 240 Vrms. The input type includes both voltage and current. The I-7017R is an upgraded version of the I-7017, with the only difference being that the I-7017R is much more suitable for critically harsh environments. The sampling rate of the I-7017R is adjustable, meaning that either fast mode or normal mode can be selected. The I-7017R also has 4 kV ESD protection as well as 3000 VDC intra-module isolation. The I-7017R-A5 is an 8-channel analog input module that is especially designed for high voltage input, and has an input range of between -50 V ~ +50 V or -150 V ~ +150 V. The M-7017R and M-7017R-A5 has the same specifications as the I-7017R and I-7017R-A5, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Model I-7017R I-7017R-A5
M-7017R M-7017R-A5
Analog Input
Channels 8
Wiring Differential
Input Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V,
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
(requires an optional external 125 Ω resistor)		 ±50 V, ±150 V
Resolution 16-bit 16-bit
Accuracy Normal Mode 0.1%
Fast Mode 0.5 %
Sampling Rate Normal Mode 10 Hz
Fast Mode 60 Hz 50 Hz
Input Impedance Voltage 2 MΩ 290 kΩ
Current –
Common Voltage Protection ±200 VDC
Individual Channel Configuration – 
Overvoltage Protection 240 Vrms ±200 VDC
Overcurrent Protection –
Open Wire Detection for 4 ~ 20 mA Yes
Model I-7017R I-7017R-A5
M-7017R M-7017R-A5
Communication
Interface RS-485
Format (N, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON (For I-7017R series)
Modbus RTU, DCON (For M-7017R series)
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator –
7-Segment LED Display –
Isolation
Intra-Module Isolation,
Field-to-Logic		 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
EFT (IEC 61000-4-4) ±4 kV to Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.3 W 1.6 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
I-7017R-A5-G     CR 8-ch High Voltage AI (±50 V, ±150 V) Module with High Voltage Protection using DCON Protocol (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
Data Sheet icon_manual icon_address-3
TOP HOME