Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 Modbus RTU 32 kênh đầu ra PWM ICP DAS M-6088-32 CR

Module RS-485 Modbus RTU 32 kênh đầu ra PWM ICP DAS M-6088-32 CR

32-channel PWM Output Module

Features

Module RS-485 Modbus RTU 32 kênh đầu ra PWM ICP DAS M-6088-32 CR

  • 32-channel PWM Output
  • Burst Mode and Continuous Mode for PWM Output
  • Individual and Synchronous PWM Output
  • 4 kV ESD and EFT Protection
  • Supports the DCON and the Modbus RTU Protocols
  • Embedded Dual Watchdog
  • DIN-Rail Mounting or Wall Mounting
Chia sẻ:
Model: M-6088-32 CR
Views: 721

Module RS-485 Modbus RTU 32 kênh đầu ra PWM ICP DAS M-6088-32 CR

The M-6088-32 provides 32-channel PWM (Pulse Width Modulation) Output, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. When required, communication with the M-6088-32 can be programmed based on the Modbus RTU and the DCON protocol, with the added benefit that different addresses can be configured via hardware to allow for Modbus RTU communication.

  • Heating system in buildings
  • Ventilation system
  • Controlling Fan Speed

CPU Module
Watchdog Timer Yes, Module (1.6 seconds), Communication (Programmable)
Isolation
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV to Power
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
LED Indicators
Status 1 x Power and Communication,
2 x Mode Status
PWM
Channels 32
Type PWM, TTL
Sink/Source (NPN/PNP) Sink
Load Voltage +5 ~ +50 VDC
Output Max. Load Current Sink: +50 VDC @ 200 mA/Channel
Frequency 50 Hz
Duty Cycle 0.1 to 99.9%
Mode Burst, Continuous
Burst Count 1 to 65535
Trigger Start Software
COM Ports
Ports 1 x RS-485
Baud Rate 1200 to 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Protocol Modbus RTU, DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +48 VDC
Consumption 2.9 W
Mechanical
Dimensions (mm) 116 x 120 x 64 (W x L x H)
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +80 °C
Humidity 10 ~ 95% RH, Non-condensing
M-6088-32     CR 32-channel PWM Output Module using the DCON and Modbus Protocols (RoHS)
Datasheet Documents
TOP HOME