Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 Modbus RTU 1 kênh DI (AC) + 3 kênh đầu ra Relay điều khiển điện chiếu sáng ICP DAS LC-103/DIN

Module RS-485 Modbus RTU 1 kênh DI (AC) + 3 kênh đầu ra Relay điều khiển điện chiếu sáng ICP DAS LC-103/DIN

1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module

Chia sẻ:
Model: LC-103/DIN
Views: 415

Module RS-485 Modbus RTU 1 kênh DI (AC) + 3 kênh đầu ra Relay điều khiển điện chiếu sáng ICP DAS LC-103/DIN

The LC-103H is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels.

The LC-103H provides 1 channel for digital input (photo couple isolation) and 3 channels for relay output. All output channels are form A type relays, while the input channel is based on a sink-type using a wire connection. The input channel can directly control a 3-channel relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the LC-103H is programmable based on the DCON & Modbus RTU protocol, and an added benefit is that different addresses can be set for DCON & Modbus RTU communication via hardware configuration.

Software
Function Local and Remote Direct Control Relay ON/OFF and Remote Status Monitoring
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power
ESD (IEC 61000-4-2) ±2 kV Contact for Each Terminal
±4 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power
LED Indicators
Status 1 LED as Power Indicator
Digital Input
Channels 1
Type Wet Contact, 90 ~ 240 VAC
ON Voltage Level 65 VAC
OFF Voltage Level 56 VAC
Isolation 5000 Vrms
Input Impedance 68 KΩ, 1 W
Relay Output
Channels 3
Type Power Relay, Form A (SPST N.O.)
Contact Rating 16 A @ 250 VAC or 16 A @ 30 VDC
Operate Time 10 ms Max.
Release Time 5 ms Max.
Electrical Endurance 120,000 ops.
Mechanical Endurance 5,000,000 ops.
Application Specification (1).Incandescent Lamp: 40W/ 220VAC * 8 Sets
(2).LED(Electronic ballast): 40W/ 220VAC *10 Sets
COM Ports
Ports 1 x RS-485
Baud Rate 9600 bps
Data Format (N, 8, 1)
Protocol Modbus RTU/DCON
Power
Input Range 10 ~ 30 VDC
Consumption 0.5 W Max.
Mechanical
Dimensions (mm) 72 x 100 x 59 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +75°C
Humidity 10 ~ 95% RH, Non-condensing
LC-103H     CR  1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module with High Power Relay Output (RoHS)
TOP HOME