Trang chủ » IIoT » IO/Sensor » iWSN Environmental Sensing Module » Module đo dòng không dây iWSN 3 Pha 2 Loop bao gồm 6 CT 400A ICP DAS iWSN-9603-360-ME-IP33 CR

Module đo dòng không dây iWSN 3 Pha 2 Loop bao gồm 6 CT 400A ICP DAS iWSN-9603-360-ME-IP33 CR

iWSN Wireless 3-phase 2-loop intelligent power meter

Chia sẻ:
Model: iWSN-9603-360-ME-IP33 CR
Views: 745

Module đo dòng không dây iWSN 3 Pha 2 Loop bao gồm 6 CT 400A ICP DAS iWSN-9603-360-ME-IP33 CR

The iWSN-9603 series module is a 3-phase AC power meter, which provides one 3-phase voltage input and two 3-phase 100A current CT inputs, and suits measuring the power information of different equipment powered by the same AC source. By means of wireless communication and powering from the measured voltage cable, it can greatly reduce the cost and duration of installation, and satisfy to the demand of distributed deployment and quick setup. Moreover, the features of Sub-GHz radio frequency and data supplement mechanism effectively improve the reliability of the wireless communication especially in the crowed or seriously shielded space of the factory environment. Consider the maintenance and installation issues, the iWSN-9603 series module is configured by the DIP switches, and uses special housing with IP33 protection to avoid the circuit short while the fire sprinkler system is activated if the module is located out of the panel box. Through the design of RTC and data timestamp, the iWSN-9603 series can fit the power saving applications, such as machine and process power efficiency improvement, power information administration, calculation of carbon emission, predictive maintenance, and big data analysis of power consumption

  • Machine and process power efficiency improvement
  • Power information administration
  • Calculation of carbon emission
  • Predictive maintenance
  • Big data analysis of power consumption

EMS Protection
EFT (IEC 61000-4-4) +/- 500 V
ESD (IEC 61000-4-2) +/- 4 kV Contact
LED Indicators
Status 1 x Power
1 x Tx
1 x Error
AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops 6(Single Phase)/ 2(Three Phase)
Input Voltage 100 ~ 277VAC
Input Current CTØ36 mm (1 A ~ 400 A)
Input Frequency 50/60 Hz
Wh Accuracy Better than 2% (PF=1)
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Power Factor (PF), Frequency
Data Update Rate 1, 10, 30, or 60 Seconds
CT
Includes CTs 6
Type Split core CT
Max. Current 400A
Inside Diameter 36mm
Leading Cable 8m
RF
Channels 0 ~ 15
Group ID 0 ~ 3
Radio Frequency 433.1000 ~ 434.6000 MHz
Transmission Power 9±1dBm (PA Off) / 18±1dBm (PA On)
Transmission Distance (LoS) 100 m
Node ID 1 ~ 31
Working Duty 1, 10, 30, or 60 Seconds
Antenna
Type Built-in Omni-directional antenna
Power
Consumption 3W
Input Type 100 ~ 277VAC
Mechanical
Dimensions (mm) 85 x 184 x 47 (W x L x H)
Installation Wall-mount
Ingress Protection Rating IP33
Environment
Operating Temperature -30 °C ~ +50 °C
Storage Temperature -40 °C ~ +55 °C
Humidity 10 ~ 90% RH, Non-condensing
iWSN-9603-360-ME-IP33     CR  iWSN Wireless 3-phase 2-loop intelligent power meter; Includes 400A CT (Inside diameter 36 mm; wire lead 8 m) x 6 (RoHS)
TOP HOME