Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Card ISA I/O 32 kênh DI + 32 kênh DO 5 V/TTL ICP DAS ISO-730 CR

Card ISA I/O 32 kênh DI + 32 kênh DO 5 V/TTL ICP DAS ISO-730 CR

32-channel Isolated digital I/O and 32-channel TTL digital I/O Board

features

Card ISA I/O 32 kênh DI + 32 kênh DO 5 V/TTL ICP DAS ISO-730 CR

  • 16-channel optically isolated digital input
  • 16-chanel optically isolated open-collector output
  • 16-channel TTL level digital input (Non-isolation)
  • 16-channel TTL level digital output (Non-isolation)
  • One 37-pin D-sub connector and two 20-pin headers for isolated I/O
  • Two 20-pin header for TTL digital I/O (Non-Isolation)
  • Built-in DC/DC converter with 3000 VDC isolation
  • Interrupt handling
  • Interrupt source : channel 0 and channel 16
  • 3750 Vrms photo-isolation protection
Chia sẻ:
Model: ISO-730 CR
Views: 565

Card ISA I/O 32 kênh DI + 32 kênh DO 5 V/TTL ICP DAS ISO-730 CR

The ISO-730 card provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Each of the 16 isolated digital input channel accept voltage from 5 V ~ 24 VDC and has a resistance of 1.2 kOhm. Every eight input channels use one external common ground. For example, channel 0 ~ 7 use EI.COM1 and channel 8 ~ 15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supply of the output port should use the external power. The channels 0 ~ 7 use EO-COM1 and channel 8 ~ 15 use EO-COM2. This interface board is easy installed in any PC/AT/XT. The board interface to field logic signed, eliminating ground loop problems and isolating the host computer from damaging voltages. The ISO-730 has one 37-pin D-sub connector and four 20-pin header. It is fully compatible to PCL-730.

Digital Input
Isolation Voltage 3750 Vrms
Channels Isolated 16
Non-Isolated 16
Compatibility Isolated Optical
Non-Isolated 5 V/TTL
Input Voltage Isolated Logic 0: DC 0 ~ 1 V
Logic 1: DC 9 ~ 24 V
Non-Isolated Logic 0: 0.8 V (max.)
Logic 1: 2.0 V (min.)
Input Impedance 1.2 KΩ, 0.5 W
Response Speed Isolated 10 kHz
Non-Isolated 30 kHz
Digital Output
Digital Output 3750 Vrms
Channels Isolated 16
Non-Isolated 16
Compatibility Isolated Sink, Open Collector
Non-Isolated 5 V/TTL
Output Voltage Non-Isolated Logic 0: 0.8 V (max.)
Logic 1: 2.4 V (min.)
Output Capability Isolated Sink: 100 mA @ 30 VDC (max.)
Non-Isolated Sink: 8 mA @ 0.5 V (max.)
Source: 0.4 mA @ 2.4 V (min.)
Response Speed Isolated 10 kHz
General
Bus Type ISA
I/O Connector Female DB37 x 1
Male DB9 x 4
Dimensions (L x W x D) 175 mm x 124 mm x 22 mm
Power Consumption 800 mA @ +5 V
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing

Sorfware

  • DLL and OCX SDK for Windows 98/NT/2000
  • DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
  • VB/VC/Delphi/BCB sample programs with source codes are included.
  • LabVIEW toolkit for Windows.
  • Driver for Linux and DasyLab.
  • Factory Automation.
  • Product Test.
  • Laboratory Automation.
ISO-730     CR 32-channel Isolated digital I/O and 32-channel TTL digital I/O Board. (RoHS)
Includes one CA-4002 D-Sub connector
CA-2010 20-pin flat cable,1 M
CA-2020 20-pin flat cable 2 M.
CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-3750DM-H DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
DB-37 Directly connect signal to D-sub 37-pin connector
DN-37 DIN Rail Mounting 37-pin Connector
DB-16R Isolated Relay output Daughter board
DB-16P Isolated Digital Input Daughter Board
icon_manual Data Sheet icon_software
TOP HOME