Trang chủ » IIoT » Cảm biến đo rung 1 trục RS-485 Modbus RTU DAS iSN-711-MRTU

Cảm biến đo rung 1 trục RS-485 Modbus RTU DAS iSN-711-MRTU

Single axis vibration sensor module (RS-485)

Features

Cảm biến đo rung 1 trục RS-485 Modbus RTU DAS iSN-711-MRTU

  • 1-axis vibration measurement
  • Frequency range: 10 Hz to 1K Hz
  • Amplitude range: ±8g
  • Data Format:
    -Acceleration(mg): RMS, Maximum, P-P
    -Velocity(mm/s): RMS
    -Top 10 spectrum values(Amplitude/Frequency)
    -Crest Factor
  • Supported Modbus RTU Slave protocol
Chia sẻ:
Model: iSN-711-MRTU
Views: 776

Cảm biến đo rung 1 trục RS-485 Modbus RTU DAS iSN-711-MRTU

The iSN-711-MRTU module is an intelligent vibration detection device. It has a built-in MEMS accelerometer, so it can easily realize equipment vibration monitoring. The module supports one RS-485 communication interface with Modbus RTU slave protocol, the user can transmit Modbus RTU commands to read the sensor’s data by RS-485 interface. The iSN-711-MRTU is suitable for real-time vibration detection in critical locations for factory monitoring applications, such as production line equipment, motors, and pumps, etc., where there is a need to monitor any vibration application.

  • Vibration monitoring system

Vibration Measurement
Axes 1
Sensor Type MEMS
Amplitude Range ±8g
Frequency Range 10 Hz to 1K Hz
COM Ports
Ports 1 x RS-485(D+, D-)
Baud Rate 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Data Format N, 8, 1
Protocol Modbus RTU
Power
Input Range +10 ~ +30 VDC
Consumption 0.3 W
Mechanical
Dimensions (mm) 51 x 30 x 19 (W x L x H)
Installation Wall-mount or magnet adsorption
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
iSN-711-MRTU     CR  Single axis vibration sensor module (RS-485)(RoHS)
Data Sheet Documents
TOP HOME