Trang chủ » IIoT » Cảm biến độ sáng, nhiệt độ và độ ẩm (Ethernet) ICP DAS iSN-201-BLE CR

Cảm biến độ sáng, nhiệt độ và độ ẩm (Ethernet) ICP DAS iSN-201-BLE CR

Illuminance,, Temperature and Humidity Sensor Module

Chia sẻ:
Model: iSN-201-BLE CR
Views: 686

Cảm biến độ sáng, nhiệt độ và độ ẩm (Ethernet) ICP DAS iSN-201-BLE CR

The iSN-201 series modules can be used for measuring indoor illumination, temperature and humidity. A wide range of interface connections can be selected to suit individual needs, including RS-485/Ethernet/ Bluetooth/ Wi-Fi models. The various models provide support for the DCON and Modbus RTU/TCP protocols, and can be easily integrated into existing HMI/SCADA/ central control systems.

The screw-free quick-connect connector and the DIP and rotary switches make the modules easy to install, repair, and maintain. The white minimalist exterior design ensures that it easy to match with interior decoration.

The WISE-5231 and electric curtain combination with the illumination meter iSN-201-E can easily be setup through a simple web interface and logic control. The two-way interlocking mode integrates the electric curtains and the Building Management System (BMS), and collects environmental sensing data simultaneously. When detecting the indoor temperature or humidity rises or the intensity of sunshine is strong, it will automatically activate the pulling motion of the electric curtain, or enable a personalized scenario to control all curtains or specifi c curtain combinations in the home environment. In addition, the user can edit the scenario and set up the curtain automation at scheduled times.

Model iSN-201-E iSN-201-BLE iSN-201-WF
Illuminance Measurement
Range 0 to 20,000 Lux
Resolution 1 Lux
Accuracy ±5%
Temperature Measurement
Measurement Range -40 to +120°C
Fire Alarm 65°C (Programmable)
Resolution 0.1°C
Accuracy Typical: ±0.5°C; refer to figure 2
Relative Humidity Measurement
Range 0 to 100% RH
Resolution 0.1% RH
Accuracy Typical: ±3% RH @ 20 ~ 80% RH; refer to figure 1
Relay Output
Channels 1
Type Power Relay, Form C
Max. Load Current NO: 10 A @ 250 VAC
NC: 6 A @ 250 VAC
Load Wattage Incandescent Bulb: 1500 W Max.; Fluorescent Lamp: 300 W Max.
Communication
Node Address Hardware: 96 to 127 / Software: 1 to 255
Protocol DCON, Modbus RTU, Modbus TCP, MQTT
Wired Interface Yes, RS-485 X 1 and Ethernet/PoE x1
Wireless Interface Bluetooth Wi-Fi
Supported Standard BT 4.0 IEEE 802.11 b/g/n
Wireless Mode Slave Infrastructure/Limited AP
Wireless Security AES 128 WEP, WPA ,WPA2
Transmission Range 20 m (LOS) 50 m (LOS)
LED Indicators
LED Indicators Yes,1 as Power, 1 as Alarm Indicator. 1 as Communication Indicator.
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal, ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Power Requirements
Power Supply 10 to 48 VDC, PoE
Reverse Polarity Protection Yes
Power Consumption 2 W 2.3 W 2.3 W
Mechanical
Installation Ceiling/surface mounted
Protection Class IP20
Dimensions (D x H) O 150 mm x 53 mm
Environment
Operating Temperature 0 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
iSN-201-BLE     CR Illuminance, Temperature and Humidity Sensor Module (RS-485, Ethernet, Bluetooth) (RoHS) (Asia Only)
EWB-C150 External Wall Box for the iSN-301 series
CA-RJ45-04 RJ45 Cable, Male-Female, 30 cm (90o)
TOP HOME