Trang chủ » IIoT » Cảm biến phát hiện rò rỉ nước RS-485 Modbus ICP DAS iSN-101 CR

Cảm biến phát hiện rò rỉ nước RS-485 Modbus ICP DAS iSN-101 CR

1-channel Liquid Leak Detection Module

Chia sẻ:
Model: iSN-101 CR
Views: 1115

Cảm biến phát hiện rò rỉ nước RS-485 Modbus ICP DAS iSN-101 CR

The iSN-101 Liquid Leak Detection Module is a low-cost intelligent liquid leak detection device that can be used to directly control Relay Output. No additional conversion module is needed and the iSN-101 can be easily integrated with a variety of monitoring systems to achieve remote alarm and remote device control. The iSN-101 Liquid Leak Detection module can be used to monitor double-core leader cable lengths of up to 500 meters, and can be used with both the extended cable and its included liquid leak detection cable. If liquid is detected, the controller immediately activates the output relay – the normally open, normally closed passive output signal . The module can be easily integrated with other collection hosts connected to the network. The iSN-101 is suitable for real-time leak detection in critical locations, such as computer room base stations, warehouses, libraries, museums and industrial sites, and also for air handling equipment, refrigeration units, liquid containers, or pump tanks, etc., where there is a need to monitor any leakage of the equipment.

When required, communication with the iSN-101 can be programmed based on the Modbus RTU protocol, with the added benefi t that different addresses can be confi gured via hardware to allow for Modbus RTU communication.

The iSN-101 is a leakage detection module used in water pipe leak monitoring in buildings with two working modes.
1. Work with the water sense cable that installed near the possible leaking pipe or area to detect leakage with alarm.
2. Work with the water leakage probe that installed in fi xed possible leak locations to detect.
The leakage monitoring is applied to the water pipes, fi re pipes and sewage pipes of buildings, as well as the detecting of domestic water, drainage and electric equipment, which can eff ectively achieve water saving and ensure the safety of living. The iSN-101 can detect leakages, send out signal and alarms, combine with the WISE IoT Edge Controller or TPD/VPD Touch HMI, and to further integrate with the mobile APP or community system.

 

 

EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power
ESD (IEC 61000-4-2) ±8 kV Air for Random Point
LED Indicators
Status 1 as Power Indicator
1 as Alarm Indicator
Analog Input
Sensitivity Adjustment Range 26 KΩ ~ 580 KΩ
Water Leakage Alarm Yes, 1 Sec ( Built-in Buzzer)
Wiring Cables Length 500 meters (include Liquid Leak Detection Cable and Extended Cables)
Analog Input
Channels 1
Detection of Pure Water Yes, 2uS/cm
Sound Off Button The button is used to stop the audible alarm.
Digital Input
Type 500 meters (include Liquid Leak Detection Cable and Extended Cables)
Trigger Mode Yes, 1 Sec ( Built-in Buzzer)
Relay Output
Channels 1
Contact Rating 0.5 A @ 125 VAC
2 A @ 30 VDC
COM Ports
Ports 1 x RS-485
Baud Rate Software Configuration: 1200 ~ 115200 bps
Data Format (N,8,1), (O,8,1), (E,8,1), (N,8,2)
Protocol Modbus RTU or DCON
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.5 W Max.
Mechanical
Dimensions (mm) 83 x 70 x 29 (W x L x H)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
iSN-101  CR 1-channel Liquid Leak Detection Module, Supports Modbus/RTU and DCON protocols. (Wall mount) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
CA-LLD-DC100-L010 1m Water Sense Cable
CA-LLD-DC100-L030 3m Water Sense Cable
CA-LLD-EC-L030 3m Leader Cable
CA-LLD-DP100 Leakage Probe
ASO-0046 180 Hold-Down Clip
ASO-0047 90 Hold-Down Clip
TOP HOME