Module I/O RS-485 Modbus RTU ICP DAS M-2000
Nội dung
Introduction
The M-2000 series is a family of network data acquisition and control modules with digital or analog I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU/ASCII protocols. The selectable transmission speed of the RS-485 port is up to 115,200 bps. Modbus has facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. The M-2000 series is slim-type Form Factor I/O that provides the saving space for the installation, easy wiring and distributed I/O points applications. The bias resistor and terminal resistor by switch selectable that is used to improve the communication and solve the communication fail of RS-485 network.
Features
- RS-485 Industrial Multi-Drop Network
- Communication Protocols: DCON, Modbus RTU
- Programmable I/O Type and Range
- Programmable Power-on Value and Safe Value
- Dual Watchdog Design
- 240 Vrms OverVoltagle Protection for AI Modules
- Slim-Type Form Factor
Applications
Selection Guide
Analog Input |
|||||
Model | AI | ||||
---|---|---|---|---|---|
Channel | Resolution | Voltage & Current Input | Sensor Input | Sampling Rate | |
M-2004 | 4 (*) | 12-bit | – | 2/3-wire DS18B20 |
1 Hz |
M-2017 | 8 | 16-bit | ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 2 0mA |
– | Normal: 10 Hz Fast: 60 Hz |
M-2018-16 | 16 | 16-bit | ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (requires an optional external 125 Ω resistor) |
Thermocouple: J, K, T, E, R, S, B, N, C |
10 Hz |
M-2004: each port can connect a maximum of 20 DS18B20 sensors. Total 80 sensors. |
Analog Input with Channel to Channel Isolation |
|||||||
Model | AI | ||||||
---|---|---|---|---|---|---|---|
Channel | Resolution | Voltage & Current Input | Sensor Inputs | Sampling Rate | |||
M-2217CI-4 | 4 | 16-bit | ±1 V, ±2.5 V, ±5 V, ±10 V,±20 mA | – | Normal: 10 Hz Fast: 200 Hz |
||
M-2217CI | 8 |