Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 10/20 kênh đầu vào tương tự ICP DAS I-97017Z CR

Module 10/20 kênh đầu vào tương tự ICP DAS I-97017Z CR

10/20-ch Analog Input Module

Tính năng

Module 10/20 kênh đầu vào tương tự ICP DAS I-97017Z CR

• 10-channel Differential or 20-channel Single-ended Inputs
• Jumper Selectable Voltage or Current Input
• 240 Vrms Overvoltage Protection
• High Resolution: 16-bits
• Supports Fast Mode and Normal Mode
• 4 kV ESD Protection
• 3000 VDC Intra-module Isolation
• Individual Channel Configuration
• Dual Watchdog
• RoHS Compliance
• Wide Operating Temperature Range: -25 to +75°C

Chia sẻ:
Model: I-97017Z CR
Views: 333
Module 10/20 kênh đầu vào tương tự ICP DAS I-97017Z
The I-97017Z is an analog input module that includes 10 differential or 20 single-ended analog input channels. It provides a programmable input range on all analog inputs. (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V,+/-10 V, +/-20 mA or 0 ~ +20 mA) Each analog input can be configured for an individual range that provides 240 Vrms high overvoltage protection and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current inputs are jumper selectable. The sampling rate of the I-97017Z is adjustable and is available in either fast or normal mode. The module also features perchannel open wire detection for +4 ~ +20 mA inputs that provides 4 KV ESD protection as well as 3000 VDC intra-module isolation.

• Industrial Automation
• Industrial Machinery
• Building Automation
• Food and Beverage Systems
• Semiconductor Fabrication
• Control Systems

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Isolation
Intra-module Isolation 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
RS Immunity (IEC 61000-4-3) ±4 kV for Power
LED Indicators
Status 1 x Power and Communication
Analog Input
Channels 10 Differential or 20 Single-ended (See Note 1), Jumper selectable
Range ±150 mV, ±500 mV, ±1 VDC, ±5 VDC, ±10 VDC, ±20 mA, 0 ~ +20 mA, +4 ~ +20 mA (jumper selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1% of FSR
Fast Mode: ±0.5% of FSR
Sampling Rate Normal Mode: 10 Hz (Total)
Fast Mode: 50 Hz (Total)
Bandwidth Normal Mode: 15.7 Hz
Fast Mode: 78.7 Hz
Input Impedance Voltage: 2 MΩ(Differential), 1 MΩ (Single-ended)
Current: 125 Ω
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Overvoltage Protection Differential: 240 Vrms
Single-ended: 150 Vrms
Overcurrent Protection 50 mA Max. at 110 VDC/VAC Max.
Individual Channel Configuration Yes
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
COM Ports
Ports 1 x RS-485
Baud Rate 1200 to 115200 bps
Data Format N, 8, 1
Protocol DCON
Power
Consumption 0.5 W Max.
Mechanical
Dimensions (mm) 31 x 134 x 144 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing

Specification Memo

Note 1: Differential mode can be used for either voltage input or current input. Single-Ended mode can only be used for voltage input.
I-97017Z     CR  10/20-ch Analog Input Module with High Voltage Protection (RoHS)
Datasheet Quick Guide
TOP HOME