Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Bộ điều khiển lập trình 1 cổng CAN ICP DAS I-9120 CR

Bộ điều khiển lập trình 1 cổng CAN ICP DAS I-9120 CR

1-port CAN Programmable Module

Chia sẻ:
Model: I-9120 CR
Views: 434

Bộ điều khiển lập trình 1 cổng CAN ICP DAS I-9120 CR

The CAN (Controller Area Network) is a serial communication bus especially suited to interconnect smart devices to build smart systems or sub-system. It efficiently supports distributed real-time control with a very high level of security. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, I-9120 with WinPAC-9000-CE7 series MCU (main control unit) represents an economic solution. It has one CAN communication port with 5-pin screw terminal connector, and is useful for a wide range of CAN applications. Besides, I-9120 uses the new Phillips SJA1000T and transceiver 82C250, which provide both CAN 2.0A and 2.0B specific, re-transmission function, bus arbitration and error detection. Combining the benefits of WinPAC-9000-CE7 series MCU without increasing the CPU loading heavily, it could be a powerful multi CAN port programmable device server by driving the program in the 186 CPU of I-9120. It can also communicate with other kinds of communication interface, such as RS-232/RS-485/Ethernet ports to be a programmable device server. Therefore, users can design the various applications between different communication protocols.

Energy Storage System

Software
Driver WP-9000-CE7
Library TC/BC/TC++/BC++, eVC++ 4.0, VC++ 2005, C#.net 2005, VB.net 2005
CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB
Flash 512 KB
SRAM 512 KB
Watchdog Timer Watchdog IC
LED Indicators
Status 1 x Power
1 x CAN status
1 x Operating mode
CAN
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Baud Rate 10 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Switch for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Power
Consumption 1.5 W
Mechanical
Dimensions (mm) 31 x 91 x 115 (W x L x H)
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
I-9120     CR 1-port Programmable CAN Module (Parallel Bus Type) (RoHS)
TOP HOME