Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module đếm xung tốc độ cao Encoder ICP DAS I-9093 CR

Module đếm xung tốc độ cao Encoder ICP DAS I-9093 CR

3-axis High-speed Encoder Module

Chia sẻ:
Model: I-9093 CR
Views: 379

Module đếm xung tốc độ cao Encoder ICP DAS I-9093 CR

I-9093 includes 3-axis encoder with compare trigger output function. It can generate a periodic trigger signal when the motor reaches a specified position. The specified position is called a breakpoint and is similar to a switch that is triggered after the motor passes a certain position. To use the compare trigger output function, you have to set an initial point (P) and a trigger period of the following points (D). The trigger signal is an I/O line that can be used to fire another device. For example, when a motor reaches a certain position, the trigger signal can be used to fire the shutter of a camera to capture an image for the defect detection. All operations of position compare and trigger pulse output are automatically done by the hardware circuit. There is no software calculation effort when the system is operating. I-9093 makes the system design simpler, and significantly increases the system performance.

• Data acquisition operation
• Optical inspection line-scan systems
• Image capture
• Position Measure

Isolation
Intra-module Isolation 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
LED Indicators
Status 1 x Power and Communication
12 x Status
Encoder Input
No. of Axes 3
Response Speed Quadrant: 2 MHz Max.
CW/CCW: 6 MHz
Pulse/Dir: 6 MHz
Resolution 32-bit
Programmable Digital Filter 1 ~ 250 μs
Photo-isolation 2500 VDC
Mode Quadrant , CW/CCW , Pulse/Dir
Input Level ON Voltage Level: +3.5 VDC ~ +5 VDC Or 10 VDC ~ 24 VDC (Jumper Select)
OFF Voltage Level: +0.8 VDC Max.
Compare Trigger Output
Channels 3
Load Voltage 5 ~ 48 V
Max. Load Current 100 mA
Trigger Pulse Width 10 μs ~ 128 μs
External Latch Input
Channels 3
Input Level ON Voltage Level: +3.5 VDC ~ +5 VDC or +10 VDC ~ +24 VDC (Jumper Select)
OFF Voltage Level: +0.8 VDC Max.
Power
Consumption 2 W Max.
Mechanical
Dimensions (mm) 31 x 134 x 144 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
I-9093     CR  3-axis High-speed Encoder Module with Compare Trigger Output (RoHS)
TOP HOME