CPU Module |
CPU |
80188, 40 MHz
|
80186, 80 MHz |
SRAM |
512 KB |
Flash |
512 KB |
EEPROM |
2 KB |
NVRAM |
31 bytes (battery backup, data valid up to 10 years) |
RTC (Real Time Clock) |
Provides seconds, minutes, hours, date, day of week, month, year |
Watchdog Timers |
Yes (0.8 second) |
DIP Switch |
Yes (8 bits) |
Communication Ports |
Ethernet |
– |
RJ45 x 1, 10 Base-T |
COM1 |
RS-232 (TxD, RxD, GND) |
COM2 |
RS-485 (Data+, Data-)
with internal self-tuner ASIC |
– |
COM3 |
RS-232/RS-485
(RS-232: TxD, RxD, RTS, CTS, GND ; RS-485: Data+, Data-) |
COM4 |
RS-232: (Full modem signals)
(TxD, RxD, RTS, CTS, DSR, DTR, CD, RI, GND) |
SMMI |
LED Display |
Yes, 5-Digit |
Programmable LED Indicators |
3 |
Push Buttons |
4 |
I/O Expansion Slots |
Slot Number |
4 |
8 |
4 |
8 |
Note: For I-8K and I-87K Modules Only |
Mechanical |
Dimensions (W x L x H) |
230 mm x 110 mm x 75.5 mm: I-8417, I-8437-80
354 mm x 110 mm x 75.5 mm: I-8817, I-8837-80 |
Environmental |
Operating Temperature |
-25 ~ +75 °C |
Storage Temperature |
-30 ~ +85 °C |
Ambient Relative Humidity |
5 ~ 95% RH (non-condensing) |
Power |
Input Range |
+10 ~ +30 VDC |
Protection |
Power reverse polarity protection |
Capacity |
20 W |
Consumption |
3.9 W |
5.1 W |
3.9 W |
5.1 W |
Protocols (Note that certain protocols require optional devices) |
Modbus RTU/ASCII Master |
A max. of 2 ports: COM1 or COM3 or COM4 or COM5 (*).
(To connect to other Modbus Slave devices.) |
Modbus RTU Slave |
A max. of 2 ports. (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.) |
I-8×17: COM1/2 |
I-8×37-80: COM1/3 |
Modbus TCP/IP Slave |
– |
Max. 4 connection.
(For connecting ISaGRAF & PC/HMI) |
User-defined Protocol |
Custom protocols can be applied at COM1, COM3, COM4 & COM5 ~ COM20 (*) by serial communication function blocks. |
Remote I/O |
One of COM3 or COM4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC. |
Fbus |
Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs. |
Ebus (for I-8×37-80) |
– |
Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port. |
SMS:
Short Message Service |
One of COM4 or COM5 (*) can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem). |
Modem Link |
Supports PC to remotely download & monitor the controller through a normal modem. |
MMICON/LCD |
One of COM3 or COM4 supports the ICP DAS MMICON. The is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float. |
Redundant Bus7000 |
Two ISaGRAF PACs can link to remote I-7000 & I-87K I/O modules at the same time. Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os. (FAQ-084) |
Optional I/O Functions (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list) |
PWM Output |
Pulse Width Modulation
Output |
Optional DO boards: I-8037, 8041, 8042, 8054, 8055, 8056, 8057,8060, 8063, 8064, 8065, 8066, 8068, 8069. (Relay Output boards cannot generate fast square wave )
Support max. 8-ch for one PAC ; Max. frequency: 500 Hz for OFF = 1 & ON = 1 ms
Output square wave: OFF: 1~32767 ms, ON: 1~32767 ms
|
Counters |
Parallel DI Counter |
Optional I-8K DI boards: I-8040, 8042, 8051, 8052, 8053, 8054, 8055, 8058, 8063, 8077
Support max. 8-ch for one PAC ; Max. count/frequency: 32-bit, 500 Hz ; Min. pulse width > 1 ms |
Serial DI Counter |
Optional I-87K DI boards: I-87040, 87051, 87052, 87053, 87054, 87055, 87058, 87063
Max. count/frequency: 16-bit (0~65535), 100 Hz |
Remote DI Counter |
All remote I-7000 & I-87K DI modules support counters.
Max. count/frequency: 16-bit (0~65535), 100 Hz |
High Speed Counter |
Max. count/frequency for I-87082: 32-bit, 100 kHz
Max. count/frequency for I-8080: 32-bit, 450 kHz |
Motion |
Motion Control |
Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control.
Ethernet communication is also available when doing motion control. |
SRAM Expansion |
Battery Backup SRAM |
With a S256/S512 (plug in the socket of the back-plane), data can also be stored in the S256/S512. PC can load these data via COM1 (or COM2 of I-8417/8817, or Ethernet Port of I-8437-80/8837-80). PC can also download pre-defined data to the S256/S512.
Optional: S256: 256 KB, S512: 512 KB. |