Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Bo mạch PCI 1 cổng CANopen Master thông minh ICP DAS I-8123W-G CR

Bo mạch PCI 1 cổng CANopen Master thông minh ICP DAS I-8123W-G CR

1 Port High Performance Intelligent CANopen Master Module

Chia sẻ:
Model: I-8123W-G CR
Views: 529

Bo mạch PCI 1 cổng CANopen Master thông minh ICP DAS I-8123W-G CR

 The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suit for networking “intelligent” devices as well as sensors and actuators within a system or sub-system. In CAN network, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, I-8123W can represent an economic solution of CANopen application and be a CANopen master device in the CAN bus on the CANopen network. It follows CiA standard specific CiA 301 v4.02 and several communication service functions to communicate with slave devices. It has an independent CAN bus communication port with 5-pin screw terminal connector, and has the ability to cover a wide range of CANopen applications. Besides, I-8123W uses the CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in WinPAC, ViewPAC, XPAC now. It is popularly applied in the industrial automation, building automation, vehicle, marine, embedded control network and etc. In order to expand the CANopen functions of ICPDAS products, I-8123W module is developed for this purpose.
Software
Driver WinPAC, ViewPAC, XPAC, XPAC-CE6 (The XPAC series PAC only support one I-8123W)
Library eVC++4.0, VC++, VB.net, C#.net
CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB
Flash 512 KB
SRAM 512 KB
Watchdog Timer Hardware watchdog
LED Indicators
Status PWR LED, RUN LED, ERR LED
CANopen
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250
Ports 1
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Porotocol CiA 301 v4.02
NMT Master
Power
Consumption 2 W
Mechanical
Dimensions (mm) 31 x 115 x 91 (W x L x H)
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
  • Industrial Machinery
  • Laboratory Equipment & Research
  • Restaurant Appliances
  • Maritime
  • Medical
  • Specialty Vehicles…etc.

The IndoSoft is one of the famous and high performance SCADA. Nowaday, it supports the CAN, CANopen and DeviceNet driver for all the coresponding converter or master series products. [more…]

Software CPMUtility Features

The CPMUtility utility can easily to access the I/O data of all the slave devices. The users can monitor the input data of the specific slave device and change the output data to the remote slave device with this utility.

  • Auto-scan all the CANopen master devices that the CPMUtility has supported
  • Auto-scan all the CANopen slave devices on the CANopen network
  • Support the EDS file
  • Dynamic PDO object setting easily
  • Guarding Event and Heartbeat Event detection
  • EMCY message receiving
  • Maximum 5 SYNC message producers per CANopen master

 

 

 


I-8123W-G     CR 1 Port High Performance Intelligent CANopen Master Module (Paralell Bus Type) (RoHS)
TOP HOME