Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 4 cổngcách ly RS-232 ICP DAS I-8114iW-G CR

Module 4 cổngcách ly RS-232 ICP DAS I-8114iW-G CR

4-port Isolated RS-232 Module

Chia sẻ:
Model: I-8114iW-G CR
Views: 1068

Module 4 cổngcách ly RS-232 ICP DAS I-8114iW-G CR

The I-8114iW-G provides 4 isolated RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port and offers speeds up to 115.2 kbps with support for full-duplex communication. In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-8114iW from permanent damage. The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-232 port.
  • Factory Automation
  • Building Automation
  • Home Automation
  • Supports interrupt driven software library
  • Supports VxCOM library
Models I-8114W I-8114iW
RS-232 Interface
Number of Ports 4
Interface TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND TxD, RxD, RTS, CTS, GND
Controller 16C950 Compatible
Speed: 115200 bps max.
Data Bit: 5, 6, 7, 8
Stop Bit: 1, 1.5, 2
Parity: None, Even, Odd, Mark, Space
FIFO: Internal 128 bytes for each port
Bus Parallel I/O Module
Connector DB-37 (Female)
Intra-module Isolated, Field to Logic 2500 Vrms
ESD Protection +/-4 kV (Contact for each channel)
Models I-8114W I-8114iW
LED Indicators
Power 1 LED
TxD 4 LEDs
RxD 4 LEDs
Power
Power Consumption 1.25 W 1.75 W
Mechanical
Dimensions (W x L x H) 31 mm x 85 mm x 114 mm
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 95% RH, non-condensing

I-8114iW-G     CR 4-port Isolated RS-232 Module (RoHS)
CA-4002 37-Pin Male D-Sub Connector with Plastic Cover
CA-9-3705 DB-37 Male (D-Sub) to 4-port DB-9 Male (D-Sub)
Cable 0.2 m Cable for I-8114W-G/I-8114iW-G (90°)
DB-37 Direct Connection Board
TOP HOME