Trang chủ » Remote I/O Module and Unit » Module 8 kênh đầu vào tương tự (AI) ICP DAS I-8017HW-G CR

Module 8 kênh đầu vào tương tự (AI) ICP DAS I-8017HW-G CR

8-channel Analog Input Module

Chia sẻ:
Model: I-8017HW-G CR
Views: 705

Module 8 kênh đầu vào tương tự (AI) ICP DAS I-8017HW-G CR

The I-8017HW is a high performance Analog Input Module. Up to 16 single-ended or 8 differential input channels are provided with 14-bit of resolution and 90 kS/s sampling rate. Each channel can be configured to an individual input range of ±10 VDC, ±5 VDC, ±2.5 VDC, ±1.25 VDC or ±20 mA. The modules also provide ±4 kV ESD protection as well as 2500 VDCintra-module isolation. All the three modules can be used to measure voltage and current source. On the I-8017HW, an external 125 Ω resistor is needed to measure current source.
  • Hệ thống thu thập dữ liệu tốc độ cao
  • Giám sát quá trình và kiểm soát
  • Phân tích rung động
  • Trình tạo mẫu kỹ thuật số từ cổng I / O kỹ thuật số
Models I-8017HW I-8017HCW I-8017DW
Analog Input
Input Channels 16-ch Single-ended/8-ch Differential
Voltage Input Range +/- 10V, +/- 5V, +/- 2.5V, +/- 1.25V
Current Input Range +20 ~ -20 mA Requires Optional External 125 Ohm Resistor Jumper Select
Resolution 14-bit
Sample Rate Single Channel Polling Mode: about 90K S/s
Single Channel Interrupt Mode: 50K S/s
8 channel Scan Mode : 16 K S/s
Accuracy ±0.1% of FSR
Zero drift ± 0.1uV/°C
Span drift ± 10ppm/°C
ESD Protection 4KV
Input Impedance 20K, 200K, 20M(Jumper Select)
Input Bandwidth 100 KHz
Intra-module Isolation, Field to Logic 2500 VDC
Connector 20 Pin Terminal block D-sub 37 Pin
LED Display
1 LED as Power Indicator/16 LED as Status Indicator
Power
Power Consumption 2W Max
Environment
Operating Temperature -25 ~ 75 °C
Storage Temperature -30 ~ 75 °C
Humidity 5 ~ 95%, Non-condensing
Dimensions
30 mm x 102 mm x 115 mm (W x L x H) Detail

I-8017HW-G     CR 8/16-ch AI Module with 20-Pin Terminal Block (Current Input Mode: Requires Optional External 125 Ω Resistor) (RoHS)
DN-37-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
CA-3705A Male-Female D-sub cable 0.5 M
CA-3710A Male-Female D-sub cable 1 M
CA-3715A Male-Female D-sub cable 1.5 M
Power Supply 24 VDC power supply
Relay Module External relay modules for I-7000 DO module
Application Books Application books designed with our products
Data Logger Software User friendly data logger software (free)
TOP HOME