Trang chủ » Industrial Communication » Bộ chuyển đổi USB sang CAN ICP DAS I-7565-H2-G CR

Bộ chuyển đổi USB sang CAN ICP DAS I-7565-H2-G CR

High Performance Intelligent USB to CAN Converter

Chia sẻ:
Model: I-7565-H2-G CR
Views: 731

Bộ chuyển đổi USB sang CAN ICP DAS I-7565-H2-G CR

I-7565-H2 are the high performance intelligent USB to CAN converters with one and two CAN channels separately. They improve the transformation speed of the I-7565, and allows receiving max. 3000 standard 2.0A CAN frames per second. Both I-7565-H2 support CAN2.0A/2.0B protocol and different baud rates from 5 Kbps to 1 Mbps. The important feature of I-7565-H2 is to support the user-defined baud rate function no matter what the baud rate is. When connecting I-7565-H2 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN bus network easier and quicker by applying I-7565-H2. The application fields can be CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.
The following is the application structure for these two USB/CAN modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565-H1/H2 Converter. These modules let users to communicate with CAN devices easily from PC with USB interface.
I-7565-H2: High Performance intelligent USB to 2- port CAN bus Converter.

 

2500Vrms isolation on CAN side
The CAN port of I-7565-H2 is isolated with 2500Vrms. This isolation can protect the local devices from the damage signal coming from CAN network.

Watchdog inside
The I-7565-H2 Watchdog is a hardware reset circuit to monitor the operation status of I-7565-H2. When working in a harsh or noisy environment, the I-7565-H2 may be down by the external signal. The circuit may let the I-7565-H2 work continuously and never halt.

Power / Communication / Error indicator display
There are three indicators on the I-7565-H2.The power indicator can help user to check whether the I-7565-H2 is standby. The communication indicator is used to show whether the I-7565-H2 is transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565-H2.

 

  • Factory Automation    
  • Building Automation    
  • Home Automation    
  • Control System    
  • Monitor System
  • Vehicle Automation

In order to apply the I-7565-H1/H2 to CAN network with NI LabVIEW software, we provide a LabVIEW 8.x library and demo for the purpose. It is very useful to develop the CAN-relative application in NI LabVIEW environment by using I-7565-H1/H2. It is easy to use and can help user to rapidly reduce their program development cycle. If users want to develop a LabVIEW industrial application with CAN network, the LabVIEW library and demo of I-7565-H1/H2 is very helpful.

Library & Demo

  • Provide CAN bus user-defined baud rate / acceptance filter configuration
  • Easily transmit/receive CAN messages for testing and display the time-stamp of each received CAN message
  • Provide saving the CAN message as “TXT” file for data log
  • Provide sending CAN message by using the internal timer of module for high precision transmission
  • Check / Reset module status remotely and get current CAN bus message flow
  • Users can develop own program by API library quickly and easily
  • Provide “CAN bus Flow Trend” screen in utility
    (For v1.09 or newer) (NEW)
  • Provide “Scroll” and “OverWrite” mode for CAN RecvMsg Table in utility
    (For v1.09 or newer) (NEW)
  • Provide “CAN-ID Tagging” function (replace the CAN-ID by a symbolic name) in OverWrite Mode.
    (For v1.10 or newer) (NEW)

Item Description

CAN bus Power Meter
This is the software solution for the CAN bus power meter(PM-213x-CAN). It is convenient to collect the distributed power information via CAN bus. [more…]

CAN OPC Server
This is the OPC server for all the SCADA like LabVIEW, iFix, DASYLab and etc. By using the OPC server, the users be able to control any CAN devices via the famous SCADA. [more…]

VxCAN Driver
The VxCAN driver is the virtual CAN driver for all CAN converters and CAN master products. Even using different products, the users could use the same APIs to develop any CAN applications. [more…]

VxCAN Utility
The VxCAN Utility, a diagnostic and test software tool, is designed to unleash the power of all CAN products of ICP DAS. It is based on the Virtual CAN technique which creates the virtual CAN ports to match the physical CAN interfaces of the installed products. [more…]

InduSoft Driver
The IndoSoft is one of the famous and high performance SCADA. Nowaday, it supports the CAN, CANopen and DeviceNet driver for all the coresponding converter or master series products. [more…]

CANcheck
This is the software for diagnosing and testing the user’s CAN devices. The graphical interface is ready-made and easy to operate. [more…]

CAN Test Tool
The CAN test tool can help users to test the CAN communication of CAN series of ICP DAS by the simple steps. This tool is based on VxCAN driver and supports most of all CAN products of ICP DAS
Item
I-7565-H1
I-7565-H2
Hardware
CAN Port Channels
1
2
CAN Interface
Transceiver
NXP 82C250
NXP 82C250
Connector
9-pin D-sub connector
10-pin terminal-block connector
Baud Rate (bps)
5K ~ 1Mbps or User-defined baud rate
5K ~ 1Mbps or User-defined baud rate
Isolation
3000VDC for DC-to-DC
2500Vrms for photo-couple
3000VDC for DC-to-DC
2500Vrms for photo-couple
Terminal Resistor
Selectable 120Ω terminal resistor by jumper
Selectable 120Ω terminal resistor by jumper
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment
C.I.A. DS-102 (CAN_H=7, CAN_L=2)
(CAN1: CAN_H=4, CAN_L=2 ) /
(CAN2: CAN_H=9, CAN_L=7 )
Receive Buffer
256 data frames
128 data frames for each CAN port
Max Data Flow
3000 fps
3000 fps (Total CAN ports)
USB Interface
Connector
USB Type B
USB Type B
Transmission speed
12M kbps
12M kbps
Specification
USB 1.1 and USB 2.0 standard
USB 1.1 and USB 2.0 standard
Receive Buffer
100 data frames
100 data frames
LED
Round LED
PWR / RUN /ERR LED
PWR / RUN /ERR LED
Software
Driver
Windows 2K/XP/7/8/10, Linux
Windows 2K/XP/7/8/10, Linux
Power
Power supply
By USB interface
By USB interface
Power Consumption
1.5 W
1.5 W
Dip Switch
Init (Firmware Update) /
Normal (Firmware Operation)
Init (Firmware Update) /
Normal (Firmware Operation)
Mechanism
Installation
DIN-Rail
DIN-Rail
Dimensions
108mm x 72mm x 35mm (H x W x D)
108mm x 72mm x 35mm (H x W x D)
Environment
Operating Temp.
-25 ~ 75 ℃
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
10 ~ 90% RH, non-condensing
I-7565-H2-G     CR High Performance Intelligent USB to 2-port CAN bus converter (Plastic Case) (RoHS)
Includes CA-USB18 (1.8M Cable).
CNT-CAN CAN bus Connector
CA-0910-C 9-pin Female D-sub & 3-wire CAN bus cable (1M)
SG-770 7/14 channel Surge Protector
4PCD-002 EMI Ferrite Split/Snap-On Core
M12A-5P-IP68 Field-Installation A-coded 5-pin Female
TOP HOME