Trang chủ » Truyền thông công nghiệp » Fieldbus Communication » PROFIBUS » Bộ chuyển đổi Profibus sang Ethernet ICP DAS I-7550E-M CR

Bộ chuyển đổi Profibus sang Ethernet ICP DAS I-7550E-M CR

PROFIBUS/Ethernet Converter

Chia sẻ:
Model: I-7550E-M CR
Views: 1550

Bộ chuyển đổi Profibus sang Ethernet ICP DAS I-7550E-M CR

The I-7550E Converter is specially designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access any kinds of Ethernet devices supporting TCP/UDP protocol. The I-7550E can be set as TCP/UDP server and client, it’s flexible for user to match their requirement. In addition, the I-7550E module built-in web server, the user can set the module by web browser. By using this module, users can put their Ethernet devices into PROFIBUS network very easily.

  • Industrial Automation
  • Factory Automation
  • Process Automation
  • Etc…
  • Provide network configuration
  • Provide TCP/UDP Server/Client configuration
  • Show diagnostic messages and device information
  • Show communication log between I-7550E and Ethernet devices

TCP/UDP Server/Client
Total Maximum 8 Clients for Server mode
Total Maximum 8 remotes for Client mode
CPU 80186, 80 MHz or compatible
SRAM/Flash/EEPROM 512 KB / 512 KB / 16 KB
Watchdog Watchdog IC
CPU built-in
ESD Protection 4 kV class A
PROFIBUS Interface
Controller Profichip VPC3+C
Transceiver ADI ADM2486
Connector 9-pin female D-Sub
Baud Rate (bps) 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m) Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol DP-V0
UART Interface
COM RS-232 (For updating firmware)
COM Connector 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
Baud Rate (bps) 115200
Data bit 8
Stop bit 1
Parity None
Ethernet Interface
Controller 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Connector RJ-45 with LED indicator
Power supply Unregulated +10 ~ +30 VDC
Protection Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption 2.5 W
Installation DIN-Rail
Dimensions 72mm x 33mm x 119mm (W x L x H)
Operating Temp. -25 ~ 75 ℃
Storage Temp. -30 ~ 85 ℃
Humidity 5 ~ 95% RH, non-condensing
I-7550E-M     CR PROFIBUS to Ethernet Converter (Metal Case) (RoHS)