Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi Gateway CAN sang RS-232/485/Ethernet ICP DAS I-7540D-UTA-G

Bộ chuyển đổi Gateway CAN sang RS-232/485/Ethernet ICP DAS I-7540D-UTA-G

CAN to Ethernet Gateway

Features

Bộ chuyển đổi Gateway CAN sang RS-232/485/Ethernet ICP DAS I-7540D-UTA-G

  • Compatible with the ISO 11898-2 standard
  • Compatible with CAN specification 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO (Bosch) standards switchable
  • CAN FD bit rates for data field from 100 kbps to 10000 kbps
  • CAN bit rates from 10 kbps to 1000 kbps
  • Fiber broken line detection
  • Support CAN Bus message filter configuration
  • Support firmware update via USB
  • Basic CAN message routing function via Group ID settings.
  • Built-in switchable 120 ohm terminal resistor for CAN Bus
  • Dip switch for CAN/CAN FD baud rate configuration
Chia sẻ:
Model: I-7540D-UTA-G CR
Views: 832

Bộ chuyển đổi Gateway CAN sang RS-232/485/Ethernet ICP DAS I-7540D-UTA-G

The I-7540D series are CAN to Ethernet converters, and are usually applied as an Ethernet to CAN/RS-232/485 Device Server. They support socket access functions and virtual COM port technology which helps users to get the CAN, RS-232, RS-485 data via virtual COM port. The I-7540D series also provide transparent mode, which enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. By the features of tiny operating system, protocol independence, small casing and flexibility, it is able to widely fit various RS-232, RS-485 and CAN applications.

LED Indicators
Status 1 x Power
3 x CAN status
COM Ports
Ports 1 x RS-232
1 x RS-485 (self-turner ASIC inside)
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 1
Ethernet
Ports 1 x RJ-45, 10/100Base-T(X)
CAN
Controller NXP SJA1000T with 16 MHz clock
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Power
Input Range +10 VDC ~ +30 VDC
Consumption 2.5 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -40 ~ +75 °C
Storage Temperature -40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
I-7540D-UTA-G     CR  CAN to Ethernet Gateway with one CAN bus, one RS-232, one RS-485 and one Ethernet (Plastic Case) (RoHS)
Datasheet Documents
TOP HOME