Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi CAN sang Ethernet/Modbus TCP/Modbus RTU ICP DAS I-7540D-MTCP-G CR

Bộ chuyển đổi CAN sang Ethernet/Modbus TCP/Modbus RTU ICP DAS I-7540D-MTCP-G CR

CAN to Ethernet/ Modbus Converter

Chia sẻ:
Model: I-7540D-MTCP-G CR
Views: 742

Bộ chuyển đổi CAN sang Ethernet/Modbus TCP/Modbus RTU ICP DAS I-7540D-MTCP-G CR

The I-7540D-MTCP is helpful for data exchanging between the Modbus devices and CAN devices. I-7540D-MTCP is a Modbus TCP server and acts as slave device in Modbus RTU network. It supports four communication modes: Modbus TCP, Modbus RTU, CAN-Ethernet Convert and Pair connection.

The major function of the I-7540D-MTCP is CAN to Modbus TCP/RTU gateway. It allows Modbus TCP/RTU device to communicate with CAN device on a CAN network. I-7540D-MTCP supports the function codes 0x03/0x04/0x10 of Modbus TCP/RTU for reading and writing CAN messages.

Furthermore, The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. Furthermore, the CAN-Modbus Converter can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). The following figure shows the application architecture for CAN-Modbus Converter.



  • Factory Automation
  • Building Automation
  • Home Automation
  • Control System
  • Monitor System
  • Vehicle Automation
LED Indicators
Status 1 x Power
3 x CAN status
COM Ports
Ports 1 x RS-232
1 x RS-485 (self-turner ASIC inside)
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 1
Ethernet
Ports 1 x RJ-45, 10/100Base-T(X)
CAN
Controller NXP SJA1000T with 16 MHz clock
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-coupler
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Power
Input Range +10 VDC ~ +30 VDC
Consumption 2.5 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
I-7540D-MTCP-G     CR  CAN to Ethernet / Modbus TCP / Modbus RTU Converter (Plastic Case) (RoHS)
TOP HOME