Trang chủ » Truyền thông công nghiệp » Fieldbus Communication » CAN Bus » Bộ lặp tín hiệu 2 kênh CAN / CAN FD cách ly ICP DAS I-7531-FD-G CR

Bộ lặp tín hiệu 2 kênh CAN / CAN FD cách ly ICP DAS I-7531-FD-G CR

Two-channel Isolated CAN / CAN FD Signal Repeater

Tính năng

Bộ lặp tín hiệu 2 kênh CAN / CAN FD cách ly ICP DAS I-7531-FD-G CR

  • Supported CAN specification 2.0A/B and CAN FD
  • Fully compatible with the ISO 11898-2 standard
  • Detected CAN bus baud rate automatically, maximum support 8000 kbps
Chia sẻ:
Model: I-7531-FD-G CR
Views: 1490

Bộ lặp tín hiệu 2 kênh CAN / CAN FD cách ly ICP DAS I-7531-FD-G CR

The I-7531-FD is a CAN/CAN FD signal repeater, which can connect two or more CAN networks with the same baud rate. Based on the signal repeat function of I-7531-FD, users can use different numbers of I-7531-FD to combine tree-shaped and star-shaped CAN network topology, and when there are too many devices on the CAN network, using I-7531-FD can increase the driving force of the CAN signal to drive more CAN devices. In addition, the CAN side of the I-7531-FD has a digital isolation of 2500 Vrms, and the CAN side and the power side also provide 3000 V DC-DC isolation protection, which can effectively isolate the noise interference between CAN networks ,and achieve protection the purpose of a specific CAN network.

CAN
Ports 2
Baud Rate CAN bus: 5 k ~ 800 kbps
CAN FD: Arbitration rate up to 1000 kbps, data rate up to 8000 kbps(Note) The data rates are verified by tests, but user-defined baud rates are possible, so the maximum data rate will depend on the concrete operating conditions (cable length, remote stations, etc.).
Isolation 2500 Vrms for digital isolation, and 3000 V for DC-DC
Terminal Resistor Build in 120 Ω terminal resistor and support jumper to select
Specification ISO-11898-2, CAN 2.0A/B and CAN FD
(CAN FD support ISO and Non-ISO standards)
Time Delay Typ. 175ns (corresponds to ~35m CAN bus length)
Power
Input Range +10 VDC ~ +30 VDC
Consumption 1 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 118 x 33 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
I-7531-FD-G     CR Two-channel Isolated CAN / CAN FD Signal Repeater (RoHS)
Data Sheet
TOP HOME