Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » RS-485 I/O Modules » I-7000 » Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083B-G CR

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083B-G CR

3-axis, 32-bit Encoder/Counter Input Module with Virtual Battery Backup

Tính năng

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083B-G CR

• 3-Axis Encoder Inputs
• 1 MHz Input Rate
• 32-bit Count Range
• Quadrant, Pulse/Dir, CW/CCW
• 2500 Vrms Optical Isolation
• Built-in Virtual Battery Backup for I-7083B(D)
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: I-7083B-G CR
Views: 210

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083B-G CR

The I-7083 and I-7083B are 3-axis high speed encoder modules. Each axis on the module can be independently confi gured as one of Quadrant, Pulse/Dir or CW/CCW input mode with a maximum input rate of 1 MHz. The high-end specifications of the I-7083/I-7083B and complete software support make it ideal for a wide range of applications in position measurement of motion systems working in industrial and laboratory environments. The I-7083B is an improved version of I-7083 with virtual battery backup function for counter value.

  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Model I-7083 I-7083D I-7083B I-7083BD
Digital Input
Channels 3-axis
Contact Wet
Sink/Source (NPN/PNP) Sink
Resolution 32-bit
Max. Speed 1 MHz
On Voltage Level 5 V: +3.5 ~ +5 VDC
12 V with 1 kΩ External Resistor: +5 ~ +12 VDC
24 V with 2 kΩ External Resistor: +7 ~ +24 VDC
Off Voltage Level +2 VDC Max.
Encoder Mode CW/CCW, Pulse/Dir, AB Phase
Virtual Battery Backup for Counter Value – Yes
Model I-7083 I-7083B I-7083D I-7083BD
Communication
Channels RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format N, 8, 1
Baud Rate 1200 to 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicators –
5-digit LED Display – Yes
Isolation
Intra-module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) –
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC (non-regulated)
Consumption 1.5 W Max. 1.7 W Max.
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
I-7083B-G     CR 3-axis, 32-bit Encoder/Counter Input Module with Virtual Battery Backup using DCON Protocol (Gray Cover) (RoHS)
Converters USB, RS-232, Fiber Optical to RS-485 Converters and Repeaters
Power Supply 24 VDC power supply
Relay Module External relay modules for I-7000 DO module
Application Books Application books designed with our products
Data Logger Software User friendly data logger software (free)
Data Sheet icon_manual icon_address-3
TOP HOME