Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » RS-485 I/O Modules » I-7000 » Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083-G CR

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083-G CR

3-axis, 32-bit Encoder/Counter Input Module

Tính năng

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083-G CR

• 3-Axis Encoder Inputs
• 1 MHz Input Rate
• 32-bit Count Range
• Quadrant, Pulse/Dir, CW/CCW
• 2500 Vrms Optical Isolation
• Built-in Virtual Battery Backup for I-7083B(D)
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: I-7083-G CR
Views: 272

Module RS-485 DCON 3-axis 32-bit Encoder Counter ICP DAS I-7083-G CR

The I-7083 and I-7083B are 3-axis high speed encoder modules. Each axis on the module can be independently confi gured as one of Quadrant, Pulse/Dir or CW/CCW input mode with a maximum input rate of 1 MHz. The high-end specifications of the I-7083/I-7083B and complete software support make it ideal for a wide range of applications in position measurement of motion systems working in industrial and laboratory environments. The I-7083B is an improved version of I-7083 with virtual battery backup function for counter value.

  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Isolation
Intra-module Isolation 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
LED Indicators
Status 1 x Power and Communication
Counter/Frequency/Encoder Input
Channels 3-axis
Type Encoder
Encoder Mode CW/CCW, Pulse/Dir, AB Phase
Counter/Encoder Bits 32-bit
Sink/Source (NPN/PNP) Sink
ON Voltage Level 5 V: +3.5 ~ +5 VDC
12 V with 1 kΩ External Resistor: +5 ~ +12 VDC
24 V with 2 kΩ External Resistor: +7 ~ +24 VDC
OFF Voltage Level +2 VDC Max.
Max. Speed 1 MHz
COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format N, 8, 1
Protocol DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.5 W Max.
Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
I-7083-G     CR 3-axis, 32-bit Encoder/Counter Input Module using DCON Protocol (Gray Cover) (RoHS)
Datasheet Documents
TOP HOME