Trang chủ » Remote I/O Module and Unit » RS-485 I/O Modules » I-7000 » Module RS-485 DCON & Modbus RTU 16 kênh đầu vào số (DI) ICP DAS I-7051 CR

Module RS-485 DCON & Modbus RTU 16 kênh đầu vào số (DI) ICP DAS I-7051 CR

16-ch Isolated DI (Dry, Wet) Module

Chia sẻ:
Model: I-7051 CR
Views: 453

Module RS-485 DCON & Modbus RTU 16 kênh đầu vào số (DI) ICP DAS I-7051 CR

The I-7051 offers 16 channels for digital input, catering for both dry and wet contact, with an effective distance for dry contact of up to 500 meters. All channels not only feature Photocouple isolation, but can also be used as 16-bit counters. The I-7051D has 16 LED indicators that can be used to monitor the status of the digital input channels. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The M-7051 has the same hardware specifications as the I-7051, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Model I-7051 I-7051D M-7051 M-7051D
Digital Input/Counter
Channels 16
Type Dry Contact Source
Wet Contact Sink/Source
Wet Contact On Voltage Level +10 ~ 50 VDC
Off Voltage Level +4 VDC Max.
Dry Contact On Voltage Level Close to GND
Off Voltage Level Open
Effective Distance
for Dry Contact
500 m Max.
Counters Max. Count 65535 (16-bit)
Max. Input
Frequency
100 Hz
Min. Pulse Width 5 ms
Input Impedance 10 KΩ
Channel-to-Channel Isolation
Overvoltage Protection ±70 VDC
Model I-7051 I-7051D M-7051 M-7051D
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators Yes, 16 LEDs as Digital Input Indicators Yes, 16 LEDs as Digital Input Indicators
7-Segment LED Display
Isolation
Intra-Module Isolation, Field-to-Logic 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 0.3 W 1.1 W 0.3 W 1.1 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
I-7051     CR 16-ch Isolated DI (Dry, Wet) Module using DCON Protocol (Blue Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
TOP HOME