Trang chủ » Remote I/O Module and Unit » RS-485 I/O Modules » I-7000 » Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS I-7045 CR

Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS I-7045 CR

16-ch Isolated DO (Source, PNP, 10~40 VDC) Module

Chia sẻ:
Model: I-7045 CR
Views: 373

Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS I-7045 CR

All modules in the 7045 series offer 16 digital output channels, each of which features Photocouple isolation. The I-7045(D)/M-7045(D) supports sourcetype output, while the I-7045(D)-NPN/M-7045(D)-NPN supports sink-type, and both are equipped with short circuit protection. There are options to enable both power-on and safe values, and 16 LED indicators that can be used to monitor the status of the digital output channels. 4 kV ESD protection, 4 kV EFT protection, 3 kV surge protection for power input and 3750 VDC Intra-module isolation are standard. The M-7045(D)/M-7075(D)-NPN has the same hardware specifications as the I-7045(D)/I-7045(D)-NPN, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7045 I-7045D I-7045-NPN I-7045D-NPN
M-7045 M-7045D M-7045-NPN M-7045D-NPN
Digital Output
Channels 16
Type Open Source Open Collector
Sink/Source (NPN/PNP) Source Sink
Load Voltage +10 ~ 40 VDC +3.5 ~ 50 VDC
Max. Load Current 650 mA/Channel 700 mA/Channel
Overvoltage Protection 47 VDC 60 VDC
Overload Protection 1.4 A (with Short-circuit Protection)
Power-on Value Yes
Safe Value Yes
Models I-7045 I-7045D I-7045-NPN I-7045D-NPN
M-7045 M-7045D M-7045-NPN M-7045D-NPN
Communication
Interface RS-485
RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
Protocol DCON (for I-7045 series)
Modbus RTU, DCON (for M-7045 series)
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator Yes, 16 LEDs as Digital Output Indicators Yes, 16 LEDs as Digital Output Indicators
7-Segment LED Display
Isolation
Intra-Module Isolation, Field-to-Logic 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for the 16 DO channels and Power,
±2 kV for the RS-485 Port
Surge (IEC 61000-4-5) ±3 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 0.6 W 1.5 W 0.4 W 1.2 W
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
I-7045     CR 16-ch Isolated DO (Source, PNP, 10~40 VDC) Module using DCON Protocol (Blue Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
TOP HOME