Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » RS-485 I/O Modules » I-7000 » Module RS-485 DCON 8 kênh đầu vào tương tự ICP DAS I-7017C CR

Module RS-485 DCON 8 kênh đầu vào tương tự ICP DAS I-7017C CR

8-channel Current Input Module

Tính năng

Module RS-485 DCON 8 kênh đầu vào tương tự ICP DAS I-7017C CR

• Current Input Only
• Built-in Resistor to simplify Current measurement
• Open Wire Detection for 4 ~ 20 mA input
• 3000 VDC Intra-module Isolation
• 4 kV ESD Protection
• RoHS Compliance
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: I-7017C CR
Views: 539

Module RS-485 DCON 8 kênh đầu vào tương tự ICP DAS I-7017C CR

The I-7017C is an 8-channel current input module that is specifically designed to measure current only. Its user-friendly design saves both time and effort when measuring a current thanks to a built-in resistor, meaning that you can now measure current directly. The I-7017RC is an upgraded version of the I-7017C, with the only difference being that the I-7017RC is much more suitable for critically harsh environments. The I-7017RC also has 4 kV ESD protection and +/- 200 VDC common voltage as current input protection, and also features 3000 VDC intra-module isolation and open wire detection for 4 ~ 20 mA input. The sampling rate of the I-7017RC and I-7017FC is adjustable, meaning that either fast mode or normal mode can be selected. The M-7017C and M-7017RC has the same specifications as the I-7017C and M-7017RC, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.

  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Model I-7017C I-7017RC I-7017FC
M-7017C M-7017RC
Analog Input
Channels 8
Wiring Differential
Input Range ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Resolution 16-bit
Accuracy Normal Mode 0.1%
Fast Mode – 0.5 %
Sampling Rate Normal Mode 10 Hz
Fast Mode – 60 Hz
Input Impedance Voltage –
Current 125 Ω
Common Voltage Protection ±15 VDC ±200 VDC ±15 VDC
Individual Channel Configuration – 
Overvoltage Protection –
Overcurrent Protection Yes, 50 mA at 110 VDC
Virtual Channel to Channel Isolation – Yes, 400 VDC –
Open Wire Detection for 4 ~ 20 mA Yes
Model I-7017C I-7017RC I-7017FC
M-7017C M-7017RC
Communication
Interface RS-485
Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (E, 8, 2)
Baud Rate 1200 ~ 115200 bps
Protocol DCON (For I-7017 series)
Modbus RTU, DCON (For M-7017 series)
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator –
7-Segment LED Display –
Isolation
Intra-Module Isolation,
Field-to-Logic		 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
EFT (IEC 61000-4-4) ±4 kV to Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.3 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
I-7017C     CR 8-ch Current Input Module using DCON Protocol (Blue Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
Data Sheet icon_manual icon_address-3
TOP HOME