Trang chủ » Remote I/O Module and Unit » RS-485 I/O Modules » I-7000 » Module RS-485 DCON 1 kênh đầu vào 6-Wire Full-Bridge Strain Gauge + 4 DO + 1 DO ICP DAS I-7016PD CR

Module RS-485 DCON 1 kênh đầu vào 6-Wire Full-Bridge Strain Gauge + 4 DO + 1 DO ICP DAS I-7016PD CR

1-ch 6-wire Strain Gauge Input Module with LED Display

Chia sẻ:
Model: I-7016PD CR
Views: 261

Module RS-485 DCON 1 kênh đầu vào 6-Wire Full-Bridge Strain Gauge + 4 DO + 1 DO ICP DAS I-7016PD CR

The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also features 3000 VDC intra-module isolation.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7016P I-7016PD
Strain Gauge Input
Channels 1
Wiring 6-wire
Sensor Types Full-Bridge
Resolution 16-bit
Accuracy ±0.05% of FSR
Sampling Rate 10 Hz
Input Impedance 20 MΩ
Individual Channel Configuration
Overvoltage Protection ±5 VDC
Open Wire Detection
Long Distance Measurement Yes
Excitation Voltage Output
Channels 1
Range 0 ~ +10 V
Max. Load Current 40 mA
Resolution 16-bit
Accuracy ±0.05%
Power-on Value Yes
Digital Input
Channels 1
Contact Dry
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Counter (50 Hz, 16-bit) Yes
Input Impedance 3 kΩ
Overvoltage Protection ±30 VDC
Digital Output
Channels 4
Type Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +3.5 ~ +50 VDC
Max. Load Current 30 mA/Channel
Power-on Value Yes
Safe Value Yes
Models I-7016P I-7016PD
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format N, 8, 1
Baud Rate 1200 to 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicator
7-Segment LED Display Yes
Isolation
Intra-Module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each Terminal
8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.3 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
I-7016PD     CR 1-ch 6-wire Strain Gauge Input Module with LED Display using DCON Protocol (Blue Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
TOP HOME