Trang chủ » Truyền thông công nghiệp » Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-5534-M CR

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-5534-M CR

Industrial 4-port CAN bus Switch

Tính năng

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-5534-M CR

• 4 CAN communication ports
• Compatible with CAN specification 2.0A and 2.0B
• Fully compatible with the ISO 11898-2 standard
• Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
• CAN bus filter is configurable
• 100 data frames buffer for each CAN channel
• Max data flow up to 2500 fps for all CAN channel
• Selectable baud rate by rotary switch
• Selectable 120Ω terminal resistor by DIP switch
• LED for CAN reception and transmission
• Support CAN network with star or tree topology
• Extending the CAN bus distance to expand the CAN network size
• Integrating different CAN network with different baud rate
• I-5534-M is casing with Aluminum metallic case
• Utility tool for CAN filter, route path, user-defined baud rate and CAN-ID mapping (v1.10 firmware) configuration
• Max. CAN-ID mapping data up to 32 for each CAN channel. (v1.10 firmware)

Chia sẻ:
Model: I-5534-M CR
Views: 467

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-5534-M CR

The I-5534-M is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-5534-M integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-5534-M could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
Model Name I-2534 I-5534-M
Hardware
Controller
 High Performance Microcontroller
RTC (Real Time Clock)
 No
Watchdog
 Watchdog IC
CAN Interface
Transceiver
 NXP TJA1042
Channel number
 4
CAN Connector 3-pin screwed terminal block with CAN_H, CAN_L, CAN_GND 9-pin male D-Sub with CAN_GND, CAN_SHLD, CAN_H, CAN_L
CAN Specification
 ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate (bps)
 5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
Baud Rate Selection
 Selectable by rotary switch
Isolation
 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor
Selectable 120Ω terminal resistor by DIP switch
 Selectable 120Ω terminal resistor by internal jump
Transmission Distance (m)
 Depend on baud rate (for example, max. 1000 m at 50 kbps )
CAN Filter
 Configurable by user
Propagation Delay
 240 us ~ 1360 us *note1
UART Interface
RS-232
 1 port (for configuration)
RS-232 Connector
3-pin screwed terminal block (TxD, RxD, GND )
 9-pin screwed terminal block (TxD, RxD, GND )
LED
Round LED
 CAN status LED x 4 , Power LED x 1
Power
Input range
 Unregulated +10 ~ +30 VDC
Power Consumption
 3W 1.5W
Mechanism
Installation
 DIN-Rail Wall-Mounting
Casing
 Flame-Resistant plastic case Aluminum metallic case
Dimensions
 32.3 mm x 99 mm x 77.5 mm (W x L x H) 116.5 x 127 x 61.3 mm (W x L x H)
Environment
Operating Temp.
 -25 ~ 75 ℃
Storage Temp.
 -30 ~ 80 ℃
Humidity
 10 ~ 90% RH, non-condensing
ESD protection 4 kV Contact for each channel
EFT protection 500V for signal, 1000V for power
EMI certification 30M ~ 1G pass
Hi-pot protection 1kV pass
Surge protection 500V pass 1kV pass

note1:
The propagation delay depends on the CAN Bus baud rate and the CAN message format.
The minimum delay is [ 11-bit ID and 8-byte data @ 1M bps ]
The maximum delay is [ 29-bit ID and 8-byte data @ 5k bps ]

 　

I-5534-M     CR Industrial 4-port CAN bus Switch (Metal Case) (RoHS)
Data Sheet icon_manual
TOP HOME