Trang chủ » Truyền thông công nghiệp » Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-2534 CR

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-2534 CR

Industrial 4-port CAN bus Switch

Tính năng

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-2534 CR

  • 4 CAN communication ports
  • Compatible with CAN specification 2.0A and 2.0B
  • Fully compatible with the ISO 11898-2 standard
  • CAN bus filter is configurable
  • 100 data frames buffer for each CAN channel
  • Max data flow up to 2500 fps for all CAN channel
  • Selectable baud rate by rotary switch
  • Selectable 120Ω terminal resistor by DIP switch
  • LED for CAN reception and transmission
  • Support CAN network with star or tree topology
  • Extending the CAN bus distance to expand the CAN network size
  • Integrating different CAN network with different baud rate
  • I-2534 is casing with Flame-Resistant plastic case
  • Utility tool for CAN filter, route path, user-defined baud rate and CAN-ID mapping configuration
  • Max. CAN-ID mapping data up to 32 for each CAN channel
Chia sẻ:
Model: I-2534 CR
Views: 337

Switch (Hub) công nghiệp 4 cổng CAN Bus ICP DAS I-2534 CR

The I-2534 is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-2534 integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-2534 could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
LED Indicators
Status 1 x Power
4 x CAN status
COM Ports
Ports 1 x RS-232
(3-pin screwed terminal block (TxD, RxD, GND ))
Fiber
Propagation Delay 240 us ~ 1360 us
CAN
Controller High Performance Microcontroller
Ports 4
Baud Rate 5 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Selectable 120Ω terminal resistor by DIP switch
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Time Delay [ 1Mbps (8-byte Data) ] ID-11bit => 240 us ;
[ 5Kbps (8-byte Data) ] ID-29bit => 1360 us
Power
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Mechanical
Casing Plastic
Dimensions (mm) 32.3 x 99 x 77.5 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

 

 

 

 

I-2534     CR  Industrial 4-port CAN bus Switch (Plastic Case) (RoHS)
Datasheet Quick Guide
TOP HOME