Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi CAN/CAN FD sang quang (Multi-mode, ST, 2KM) ICP DAS I-2533T-FD

Bộ chuyển đổi CAN/CAN FD sang quang (Multi-mode, ST, 2KM) ICP DAS I-2533T-FD

CAN/CAN FD to Multi-mode Fiber Bridge

Chia sẻ:
Model: I-2533T-FD CR
Views: 784

Bộ chuyển đổi CAN/CAN FD sang quang (Multi-mode, ST, 2KM) ICP DAS I-2533T-FD

The I-2533T-FD is a local CAN/CAN FD (CAN with Flexible Data-Rate) bridge used to establish a connection between two CAN bus system via multi-mode fiber optic transmission medium. In order to solve the problem between CAN/CAN FD and fiber transmission medium. The I-2533T-FD is specially designed for converting the electrical CAN/CAN FD bus signal to fiber optic cables. Besides, I-2533T-FD has three more important features. First, the transmission distance limitation of the CAN bus system will not affected due to the different CAN/CAN FD baud rate. It means that the total CAN/CAN FD bus working distance can be extended. Second, the bus error on one CAN/CAN FD network will not affect the operation of another CAN/CAN FD network. Finally, the two CAN/CAN FD network can communication with each other by using different CAN/CAN FD baud rate for highly flexibility.

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
LED Indicators
Status 1 x Power
3 x CAN status
2 x Fiber status
Fiber
Ports Multi-Mode; ST Duplex connector x 1; 100 Base-FX
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Wavelength 1310 nm
TX Output -20 dBm Min. , -14 dBm Max.
RX Sensitivity -32 dBm Max.
RX Overload -8 dBm Max.
Budget 12 dBm
Propagation Delay 190 us (*Note1)
Distance Between Stations 2 km (62.5/125 μm recommended)
USB
Specification USB 2.0 High Speed (480Mbps)
Connector USB Type B, Mini-B
Driver Built-in Windows 7/8.1/10
CAN
Ports 1
Baud Rate CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10M bps (*Note2)
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Terminal Resistor Switch for 120Ω terminal resistor
Specification ISO 11898-2, CAN 2.0 A/B and FD
Filter Yes
Power
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Mechanical
Casing Plastic
Dimensions (mm) 33 x 127 x 101 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Specification Memo

Note1: The propagation delay depends on the CAN Bus baud rate and the CAN message format. This value has been tested using a CAN baud rate of 1 Mbps, the CAN ID 0x12345678 and 8 bytes of data with a value of 0xFF.
Note2: The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,…), but it can also not be reached.

 

I-2533T-FD     CR  CAN/CAN FD to Multi-mode Fiber Bridge; 1 (2 km) multi-mode, ST connector (RoHS)
TOP HOME