Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi CAN sang quang Multi-mode (ST) ICP DAS I-2532 CR

Bộ chuyển đổi CAN sang quang Multi-mode (ST) ICP DAS I-2532 CR

CAN to Multi-mode Fiber Converter

Tính năng

Bộ chuyển đổi CAN sang quang Multi-mode (ST) ICP DAS I-2532 CR

• Compatible with CAN specification 2.0A and 2.0B
• Fully compatible with the ISO 11898-2 standard
• Support a range of baud rates from 10kbps ~ 500Kbps
• Jumper for 120Ω terminal resistor of the CAN bus
• Fiber Port: ST (Multi-mode)
• Fiber Cable: 50/125 μm , 62.5/125 μm, 100/140μm
• Wave Length: 850 nm
• Auto-baud detection
• up to 100 nodes on CAN port
• Removable terminal block
• Mount easily on DIN-rail
• 3 kv galvanic isolaton
• One CAN and one fiber channel

Chia sẻ:
Model: I-2532 CR
Views: 979

Bộ chuyển đổi CAN sang quang Multi-mode (ST) ICP DAS I-2532 CR

Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference and has been used in harsh environment extensively. On the other hand, CAN bus is famous in industrial application. In order to solve the problem between different transmission medium, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.
The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economic solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.

  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition
CAN Interface
Connector
8-pin screwed terminal block (CAN_GND, CAN_L, CAN_H, N/A for others)
Baud Rate (bps)
10 k ~ 500 k
Transmission Distance (m)
Depend on baud rate
Terminal Resistor
Switch for 120Ω terminal resistor
Specification
ISO-11898-2, CAN 2.0A and CAN 2.0B
Fiber Interface
Connector
ST (Multi-mode)
Wave Length
850 nm
Fiber Cable
50/125 μm , 62.5/125 μm, 100/140 μm (62.5/125μm is recommended)
Propagation Delay
125ns max (125ns delay shortens bus line length by ~ 25 m)
Transmission Distance (m)
1.4 km max (in 62.5/125 μm fiber cable)
LED
Round LED
PWR LED, TD LED, RD LED
Power
Power supply
Unregulated +10 ~ +30 VDC
Protection
Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption
0.5 W
Mechanism
Installation
DIN-Rail
Dimensions
32.3mm x 77.5mm x 99.0mm (W x L x H)
Environment
Operating Temp.
-25 ~ 75 ℃
Storage Temp.
-30 ~ 80 ℃
Humidity
10 ~ 90% RH, non-condensing
I-2532     CR CAN to Multi-mode Fiber Converter; 1 (1.4 km) multi-mode, ST connector (RoHS)
Datasheet Quick Guide
TOP HOME