Trang chủ » Wireless Communication » Modem WCDMA 2G/3G kết nối RS-232/RS-485 với GPS ICP DAS GTP-500M CR

Modem WCDMA 2G/3G kết nối RS-232/RS-485 với GPS ICP DAS GTP-500M CR

2G/3G Multi Function Controller with GPS

Chia sẻ:
Model: GTP-500M CR
Views: 712

Bộ điều khiển WCDMA 2G/3G kết nối RS-232/RS-485 với GPS ICP DAS GTP-500M CR

GTP-500M là một điều khiển với GPS. Trong CPU 32 bit hiệu suất cao, GTP-500M phù hợp với môi trường công nghiệp khắc nghiệt. Nó có tính năng 3G module, 1 RS-232, 1 RS-485, SD và một giao diện mở rộng I/O bus. Nó có thể được sử dụng trọng lịnh vững M2M để có thể truyền GPS và dữ liệu của thiết bị Modbus bằng WCDMA/GPRS. GTP-500M có 3 tính năng cho yêu cầu khác nhau, bao gồm RTU, RMV và SMS. Do đó, GTP-500M là một giải pháp lý tưởng để giám sát môi trường, quản lý thiết bị từ xa và hệ thống giám sát phương tiện cho các ứng dụng M2M.

The M2M RTU center software with friendly Graphic interface is to manage the GPRS RTU products easily. Users can monitor the I/O data and status of GPRS RTU devise by the interface on PC. By using the GPRS RTU API tool and M2M RTU center software, any remote monitoring system can be achieved easily and efficiently. For SCADA system, the M2M.OPC server is provided to connect to SCADA by OPC interface.

Web site
M2M RTU Center
M2M RTU series management software
M2M RTU development tool
OPC Server for M2M RTU devices
EZ Data Logger
The small data logger software of ICP DAS
InduSoft SCADA
SCADA software
  • Easy to Establish GPRS Network Applications
    It is a big headache for engineers to establish the GPRS applications because the dynamic IP management is required. Applying the GT-540 and M2M RTU center software, the dynamic IP addresses can be managed between them. The remote GPRS RTU product would connect to M2M RTU Center automatically. Therefore, all remote GPRS RTU devices can be managed by s single centralized M2M GPRS RTU Center software with a fixed IP address. Moreover, there are M2M API tool and OPC server for engineers to develop the GPRS applications by VB, VC or SCADA development tools conveniently without any IP address management effort.
  • Active data transmission
    The GT-540 with active I/O transmission mechanism can raise the communication. Unlike the traditional poll communication, it would transfer the data by the defined time, DI trigger or AI hi/lo alarm. In addition to improve the way of communication, that can also reduce the AP effort.
  • Transfer data by e-mail
    Expect for the transferring data by the general communication with the M2M RTU center, users can choose the e-mail mode to send these data by e-mail over GPRS in the fixed time.
  • Modbus RTU device connectivity
    The GT-540 is built-in Modbus RTU protocol. That can make any Modbus RTU device connect to the GT-540. By the way of GT-540, Modbus RTU devices can be used in GPRS remote system. The max Modbus RTU device can be connected to the GT-540 is three.
  • Simple Local I/O link Control
    There are I/O built-in GPRS RTU devices of ICP DAS. Therefore, these products can be the GPRS I/O devices. Expect for these local I/O data can be sent to the host PC, the I/O link function of them help users to do the simple control in local field. For example: the DI trigger or high/low AI alarm can driver the DO channel.
  • Built-in I/O Data Logging
    The GT-540 provides an external SD interface. These local I/O and Modbus data are recorded in SD memory card for one day in a single file.

Tính năng RTU:

Tính năng RMV:

Tính năng SMS:

CPU ARM Microprocessor
WDT(watchdog) Yes
2G System
Frequency Band
850/900/1800/1900 MHz
Power Class
Class 4 (2 W @ 850/900 MHz)
Class 1 (1 W @ 1800/1900 MHz)
3G System
Frequency Band
850/900/1900/2100 MHz
Power class Class 3(250mW @ WCDMA/HSPA)
Serial ports
Utility port (COM1)
RS-232: TxD, RxD, GND (use for device configuration and debug)
RS-485: D+, D- (use for communication with other devices)
Baud Rate
9600 bps and 115200 bps

Power reverse polarity protection

Frame Ground Protection
ESD, Surge, EFT, Hi-Pot
Required Supply Voltage
+10 VDC ~ +30 VDC
Dimensions (W x L x H) 117 mm x 137 mm x 58 mm
Operating Temperature -25 ℃ ~ +75 ℃
Storage Temperature -30 ℃ ~ +80 ℃
Ambient Relative Humidity
5 ~ 95% RH, non-condensing


GTP-500M     CR 2G/3G Multi Function Controller with GPS (RoHS)
5 dBi 4G External Antenna (Support 3G/4G)
Battery Box (RoHS)
Add-on I/O Expansion Board