Trang chủ » Industrial Communication » Switch công nghiệp quản lý Layer-8 cổng Gigabit Ethernet + 2 cổng quang SFP ICP DAS FSM-510G-2F CR

Switch công nghiệp quản lý Layer-8 cổng Gigabit Ethernet + 2 cổng quang SFP ICP DAS FSM-510G-2F CR

8-port 10/100/1000Base-T + 2 (100/1G) SFP L2 Plus Managed Switch

Chia sẻ:
Model: FSM-510G-2F CR
Views: 584

Switch công nghiệp quản lý Layer-8 cổng Gigabit Ethernet + 2 cổng quang SFP ICP DAS FSM-510G-2F CR

FSM-510G-2F is a L2 Managed Switch that meets all IEEE 802.3ab/u/x/z Gigabit, Gigabit Ethernet and Ethernet specifications. It provides 8 gigabit Ethernet ports (10/100/1000 Mbps TP) 2 SFP ports.

The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-Based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, configure and control each port activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON .

Models FSM-510G-4F FSM-510G-2F
Technology
Standards Port Mirroring helps supervisor monitoring network
IEEE 802.1Q tag-based VLAN for performance
IEEE 802.1X Access Control improve network security
IEEE 802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3
Unknown Unicast/Broadcast/Multicast storm control
IP-MAC-Port binding for LAN security
QCL Based on Application traffic for QoS and rate limitation management
Supports DHCP snooping
ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy
Supports “power saving” for Green Ethernet requirement
Supports LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves.
MAC Addresses 8 K
Processing Type Store & forward
Protocol VLAN, QoS, Port Trunk, NTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP
Interface
RJ-45 Ports 6-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection 8-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
SFP 4-port 100/1000 Mbps SFP Fiber Module slots 2-port 100/1000 Mbps SFP Fiber Module slots
LED Indicators POWER, ALARM , TP Port LED
Ethernet Isolation 1500 VRMS 1 minute
Serial Port RS-232 (TxD, RxD and GND); Non-isolated
Power
Input Voltage Range +12 VDC ~ +48 VDC
Power Consumption 10.5 W
Frame Ground for EMS Protection Yes
Mechanical
Casing Metal
Environmental Rating IP30
Dimensions (W x L x H) 60 mm x 109 mm x x 154 mm
Installation DIN-Rail mounting, Wall mounting
Environment
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 5 ~ 95% RH, non-condensing
FSM-510G-2F     CR 8-port 10/100/1000Base-T + 2 (100/1G) SFP L2 Plus Managed Switch
SFP-1G85M-SX Multi-mode 850 nm, 0.5 km SFP module
SFP-1G13M-SX2 Multi-mode 1310 nm, 2 km SFP module
SFP-1G13S-LX Single-mode 1310 nm, 10 km SFP module
SFP-1G13S-LX20 Single-mode 1310 nm, 20 km SFP module
SFP-1G13S-LHX Single-mode 1310 nm, 40 km SFP module
SFP-1G15S-XD Single-mode 1550 nm, 60 km SFP module
TOP HOME