Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module đầu vào 16 kênh DI ICP DAS FR-2053T CR

Module đầu vào 16 kênh DI ICP DAS FR-2053T CR

FRnet I/O Module with 16-channel Isolated DI (20~24VDC)

features

Module đầu vào 16 kênh DI ICP DAS FR-2053T CR

• Built-in Wire-saving FRnet DI/DO control
• Simple synchronization mechanism
• No software overhead on protocol processing
• Supporting broadcasting (1:n data transmission)
• Duplicating output easily
• Fixed I/O scan-time and I/O synchronization
• DIN-Rail mountable

Chia sẻ:
Model: FR-2053T CR
Views: 582

Module đầu vào 16 kênh DI ICP DAS FR-2053T CR

The FR-2053T/2053HT has 16-channel isolated photo coupler input, while the FR-2057 has 16-channel isolated photo-coupler output. The default signal connector of FR-2057 is a 20-pin header. The “T” stands for screw terminal connector and the “S” stands for 3-pin shroud connector. Each 3-pin connector has one Vcc pin, one ground and one signal pin. According to different applications, the users can choose suitable modules. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2057; refer to literature related to I-8172W, FRB-100/200U.
  • Built-in Wire-saving FRnet DI/DO control
  • High-speed transmission reliability
  • Simple synchronization mechanism
  • No software overhead on protocol processing
  • Supporting broadcasting (1:n data transmission)
  • Duplicating output easily
  • Fixed I/O scan-time and I/O synchronization
  • DIN-Rail mountable
Analog Input
Input Channels 16
Input Type Sink (NPN)
On Voltage Level +20~24VDC
Off Voltage Level +3VDC max
Input Impedance 4.7 kOhm
Turn-on delay time less than 1.0ms
Turn-off delay time less than 1.0ms
Isolation Voltage 1500Vrms
Interface
2-wire cabling 2-wire cabling Belden 9841 (2P twisted-pair cable),
When different cables are used, the transmission distance may change
Transfer distance Max. 400m for FR-2053/FR-2053T
Max. 100m for FR-2053HT
LED Indicators Power, Communication Run, Communication Error, Terminal resistor, Digital output
Transfer speed 250 kbps for FR-2053/FR-2053T
1 Mbps for FR-2053HT
Cyclic scan time 2.88ms for FR-2053/FR-2053T
0.72ms for FR-2053HT
Connection 20-pin header for FR-2053
Removable 20-pin Terminal Block for FR-2053T/FR-2053HT
Power
Input Voltage Range +10 ~ +24 VDC (Non-isolation)
Power Consumption 2 W Max.
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connector 5-Pin Removable Terminal Block
Mechanical
Mechanical Plastic (Flammability UL 94V-0)
Dimensions (W x L x H) 33 mm x 102 mm x 110 mm
Installation DIN-Rail
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
FR-2053T     CR FRnet I/O Module with 16-channel Isolated DI (20~24VDC) (250 kbps, Max. 400m) ((RoHS)
icon_applicaton icon_manual
TOP HOME