Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module I/O FRnet với 16 kênh đầu vào số cách ly ICP DAS FR-2053iTA CR

Module I/O FRnet với 16 kênh đầu vào số cách ly ICP DAS FR-2053iTA CR

FRnet I/O Module with 16-channel Isolated DI (3.5~30VDC) and Isolated Communication Line

Chia sẻ:
Model: FR-2053iTA CR
Views: 626

Module I/O EtherCAT Slave với 32 kênh DO cách ly ICP DAS ECAT-2045K-32 CR

The FR-2053iTA has 16-channel isolated Sink/Source input, while the FR-2057TA has 16-channel isolated source output. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2053iTA/2057TA; refer to literature related to I-7188EF, I-8172W, FRB-100/200U.
EMS Protection
ESD (IEC 61000-4-2) Yes
LED Indicators
Status Power, Communication Run, Communication Error, Terminal Resistor, Digital Input
Digital Input
Channels 16
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source (NPN/PNP)
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max.
Isolation 3750 Vrms
Input Impedance 3 KΩ
FRnet
Wire Cable 2-wire cabling Belden 9841 (2P twisted-pair cable),
When different cables are used, the transmission distance may change
Transfer Speed 250 kbps and 1Mbps (Default)
DIP Switch Settings
Transfer Distance Max. 400 m for speed 250 kbps
Max. 100 m for speed 1M (Default)
Cyclic Time 2.88 ms for speed 250 K
0.72 ms for speed 1M (Default)
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC (Non-isolation)
Consumption 2.4 W Max.
Mechanical
Casing Plastic
Dimensions (mm) 33 x 102 x 107 (W x L x H)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
FR-2053iTA     CR FRnet I/O Module with 16-channel Isolated DI (3.5~30VDC) and Isolated Communication Line (RoHS)
TOP HOME