Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module truyền thông Ethernet Modbus TCP Slave ICP DAS FCM-MTCP CR

Module truyền thông Ethernet Modbus TCP Slave ICP DAS FCM-MTCP CR

Field Communication Module with Modbus/TCP slave

Tính năng

 

 

Chia sẻ:
Model: FCM-MTCP CR
Views: 726

The FCP-MTCP is a communication module for the iDCS-8000 system. It supports Modbus/TCP slave, most well-known industrial protocol, for the PLCs or controllers which support Modbus/TCP master. This module also offers LED to indicate system diagnostic and Ethernet connection status locally. Besides, two rotary switches are provided to instant configure ID (IP address) for other FCM-MTCP. Moreover, the module offers 1000 VDC isolation between channels and backplane bus. If any high voltage or current damages the channels, the system (backplanes, other modules, and control unit) won’t be affected because the benefit of isolation.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
EMS Protection
EFT (IEC 61000-4-4) Yes
ESD (IEC 61000-4-2) Yes
LED Indicators
Status 1 x Run, 1 x HF, 1 x RF, 1 x Link, 1 x Act
Ethernet
Ports RJ-45, 10/100Base-T(X)
Protocol Modbus/TCP slave (Allow 4 connection access simultaneously)
Power
Consumption 2.1 W @ 24 VDC Max.
Mechanical
Dimensions (mm) 30 x 85 x 115
Environment
Operating Temperature -25 ~ +75 °C
Humidity 5 ~ 95% RH, Non-condensing
FCM-MTCP     CR  Field Communication Module with Modbus/TCP slave (RoHS)
Data Sheet Download Center
TOP HOME