Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 8 kênh đầu vào xung tốc đọ cao ICP DAS F-8084 CR

Module 8 kênh đầu vào xung tốc đọ cao ICP DAS F-8084 CR

8-ch Isolated High Speed Pulse Input Redundant Module

Tính năng

Module 8 kênh đầu vào xung tốc đọ cao ICP DAS F-8084 CR

  • 32-bit counter
  • 8 up-counter/frequency channels
  • 1 ~ 32767 us digital filter
  • Falling/Rising/Both edge trigger
  • RoHS compliance
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • No error counting when redundant switching
Chia sẻ:
Model: F-8084 CR
Views: 508

Module 8 kênh đầu vào xung tốc đọ cao ICP DAS F-8084 CR

The F-8084 is a 32-bit high speed up-counter/frequency module. It can count up to 500 KHz input signal, and accuracy of the frequency mode is +/-0.4% FSR. The F-8084 features many diagnostic like some failures of communication, EEPROM, WDT, decoder, etc. When the modules are in the redundant mode and a failure occurs the slave module will take over as soon as possible. Moreover, the redundant switching is not only fast but also reliable for data exchanging. Thus, users can easily to use F-8084 to count.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
EMS Protection
EFT (IEC 61000-4-4) Yes
ESD (IEC 61000-4-2) Yes
LED Indicators
Status 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status)
Counter/Frequency/Encoder Input
Channels 8
Type Counter/Frequency
ON Voltage Level 4.5 VDC~ 30 VDC
OFF Voltage Level < 1 VDC
Frequency Accuracy 1 Hz ~ 500 KHz
Low Pass Filter Yes (1 ~32767 us)
Input Impedance 200/500/1KΩ or none (5 KΩ)
I/O Expansion
I/O Type DN-PI-M
Power
Consumption 1.9 W
Mechanical
Dimensions (mm) 30 x 85 x 115
Weight 300 g
Environment
Operating Temperature -25 °C ~ +75 °C
Humidity 5 ~ 95% RH, Non-condensing
F-8084     CR  8-ch Isolated High Speed Pulse Input Redundant Module (RoHS)
Quick Guide
TOP HOME