Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 8 kênh đầu ra tương tự tích hợp giao diện HART ICP DAS F-8028CH

Module 8 kênh đầu ra tương tự tích hợp giao diện HART ICP DAS F-8028CH

8-channel Isolated Analog Output Redundant Module with HART Master Interface (Gray Cover)(RoHS)

Chia sẻ:
Model: F-8028CH
Views: 443

Module 8 kênh đầu ra tương tự tích hợp giao diện HART ICP DAS F-8028CH

The F-8028CH is a 16-bit, 8-channel analog output module. It provides digital to analog converter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. In addition to current output, F-8028CH is also built-in HART master interface to remotely maintain devices via HART. Besides, the F-8028CH provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
EMS Protection
EFT (IEC 61000-4-4) Yes
ESD (IEC 61000-4-2) Yes
LED Indicators
Status 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status)
Analog Output
Channels 8
Type 4 ~ 20 mA, currnet sourcing
Range ±25% (0 ~ 24 mA)
Resolution 16 bit
Accuracy ±0.05% FSR
Zero Drift ±0.2 μV/℃
Span Drift ±25 ppm/℃
Response Time <200 μS
Open Wire Detection Yes
Voltage Output Capability 0 ~ 750 Ω
Power-on Value Yes
Safe Value Yes
Isolation 3000 VDC
I/O Expansion
I/O Type DN-AIO-M
Power
Consumption 0.5 W + 10W
Mechanical
Dimensions (mm) 30 x 85 x 115
Weight 300 g
Environment
Operating Temperature -25 °C ~ +75 °C
Humidity 5 ~ 95% RH, Non-condensing
F-8028CH CR 8-channel Isolated Analog Output Redundant Module with HART Master Interface (Gray Cover)(RoHS)
TOP HOME