Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module dự phòng đầu vào 16 kênh ICP DAS F-8017C2 CR

Module dự phòng đầu vào 16 kênh ICP DAS F-8017C2 CR

16-ch Isolated Current Input Redundant Module

Chia sẻ:
Model: F-8017C2 CR
Views: 385

Module dự phòng đầu vào 16 kênh ICP DAS F-8017C2 CR

The F-8017C2 is a 16-bit, 16-channel analog differential input module. This module accepts current input range 4 ~ 20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 1kHz sampling rate for some application. The F-8017C2 provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Feature
Redundant Yes (Switching time < 100us)
Over-Current Protection Yes
Termination board break off detection Yes
LED indicator 1 RUN, 1 ACT, 1 DUX
Analog Input
Number of channels 8
Type 4 ~ 20 mA (Support ±25% overrange
Maximum Allowable Input Current 25 mA
Resolution 16 bit
Sampling Rate 500 Samples/sec(Total)
Accuracy ±0.05% FSR
Zero Drift ±20 μV/°C
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB
Input Impedance 230 Ω
Data Range -2500~12500 (0 ~ 24 mA)
Isolation 3000 VDC
Certification
EMC EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board DN-AIO-M
Maximum power consumption 1.5 W
Operating temperature -25°C~ +75°C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30 mm x 85 mm x 115 mm
F-8017C2     CR 16-ch Isolated Current Input Redundant Module (RoHS)
TOP HOME