Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module Ethernet Modbus TCP & MQTT 6 kênh đầu vào số (DI)+6 kênh đầu ra Relay ICP DAS ETA-7060 CR

Module Ethernet Modbus TCP & MQTT 6 kênh đầu vào số (DI)+6 kênh đầu ra Relay ICP DAS ETA-7060 CR

Ethernet I/O Module with 6-ch Power Relay and 6-ch DI

Tính năng

Module Ethernet Modbus TCP & MQTT 6 kênh đầu vào số (DI)+6 kênh đầu ra Relay ICP DAS ETA-7060 CR

  • Built-in Web Server
  • Support Modbus TCP/UDP and MQTT Protocols
  • Powerful 32-bit MCU Handles Efficient Network Traffic
  • Dual Watchdog
  • I/O Pair Connection (Push and Pull)
  • Support Web Configuration and Firmware Update via Ethernet
  • Built-in I/O
    • DI/Counter: 6 Channels
    • Power Relay: 6 Channels
Chia sẻ:
Model: ETA-7060 CR
Views: 713

Module Ethernet Modbus TCP & MQTT 6 kênh đầu vào số (DI)+6 kênh đầu ra Relay ICP DAS ETA-7060 CR

The ETA-7060 provides 6 wet contact digital input channels and 6 form A electromechanical relays. It features optical isolation for 3000 VDC of transient overvoltage protection. Each input channel can be used as a 32-bit counter. The power-on value and safe value of the relay are programmable.

Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal oxide varistor for AC loads.

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation Ethernet: 1500 VDC
I/O: 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
LED Indicators
Status Run, Ethernet
Digital Input/Counter
Channels 6
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 to +50 VDC
OFF Voltage Level +4 VDC (max.)
Max. Counts 4,294,967,295 (32-bit)
Frequency 3 kHz
Min. Pulse Width 1 ms
Input Impedance 10 KΩ
Overvoltage Protection +70 VDC
Relay Output
Channels 6
Type Power Relay, Form A (SPST N.O.)
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Power on Value Programmable
Safe Value Programmable
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Security Password and IP Filter
Protocol Modbus TCP, Modbus UDP, and MQTT
Power
Reverse Polarity Protection Yes
Consumption 2.2 W
Powered from Terminal Block +10 to +30 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
ET-7252     CR Ethernet I/O Module with 2-port Ethernet Switch, 8-ch DI and 8-ch DO (RoHS)
Datasheet Documents
TOP HOME