Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 2 cổng Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS ET-7226 CR

Module 2 cổng Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS ET-7226 CR

Ethernet I/O Module with 2-port Ethernet Switch, 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO

Chia sẻ:
Model: ET-7226 CR
Views: 647

Module 2 cổng Ethernet Modbus TCP 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS ET-7226 CR

The ET-7226 is a multi-function module with 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. It provides various programmable analog inputs (+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA), and analog outputs (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input/output can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper.

Tự động hóa tòa nhà, Tự động hóa nhà máy, Tự động hóa máy, Bảo trì từ xa, Chẩn đoán từ xa, Thiết bị kiểm tra.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation Ethernet: 1500 VDC
I/O: 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status Run, Ethernet, I/O
Analog Input
Channels 6 (Differential)
Type Voltage
Current
Range ±500 mV, ±1 V, ±5 V, ±10 V
0 to 20 mA, ±20 mA, 4 to 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1%
Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 samples/second (Total)
Fast Mode: 50 samples/second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB (min.)
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Open Wire Detection For 4 to 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Analog Output
Channels 2
Type Voltage
Current
Range +0 to +5 VDC, ±5 VDC, +0 to +10 VDC, ±10 VDC
0 to 20 mA, 4 to 20 mA
(Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection For 4 to 20 mA only
Voltage Output Capability 10 V @ 20 mA
Current Load Resistance 500 Ω
Individual Channel Configuration Yes
Power-on Value Programmable
Safe Value Programmable
Digital Input/Counter
Channels 2
Type Dry Contact
Wet Contact
ON Voltage Level Dry: Close to GND
Wet: +1 VDC (max.)
OFF Voltage Level Dry: Open
Wet: +3.5 to +30 VDC
Max. Counts 4,294,967,295 (32-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Effective Distance 500m (max.)
Overvoltage Protection +30 VDC
Digital Output
Channels 2
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 to +50 VDC
Load Current 700 mA/channel
Overvoltage Protection +60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Power on Value Programmable
Safe Value Programmable
Ethernet
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
LAN bypass Yes
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP
Power
Reverse Polarity Protection Yes
Consumption 5.0 W
Powered from Terminal Block +12 to +48 VDC
Mechanical
Dimensions (mm) 76 x 120 x 38 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
ET-7226     CR Ethernet I/O Module with 2-port Ethernet Switch, 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO (RoHS)
TOP HOME