Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module Ethernet Modbus TCP 3 kênh đầu vào Counter/Encoder ICP DAS ET-7083 CR

Module Ethernet Modbus TCP 3 kênh đầu vào Counter/Encoder ICP DAS ET-7083 CR

Ethernet I/O Module with 3-ch Encoder/Counter Input

Tính năng

Module Ethernet Modbus TCP 3 kênh đầu vào Counter/Encoder ICP DAS ET-7083 CR

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • Built-in I/O
    • 3-Axis 32-bit encoder/counter inputs
    • 1 MHz max. for Quadrant mode
    • 4 MHz max. for CW/CCW, Pulse/Direction mode
    • Count Value Retention for 10 years
Chia sẻ:
Model: ET-7083 CR
Views: 529

Module Ethernet Modbus TCP 3 kênh đầu vào Counter/Encoder ICP DAS ET-7083 CR

The ET-7083 is a 3-axis high speed encoder/counter module. Its each axis can be individually configured for Quadrant, Pulse/Direction or CW/CCW counting modes. The maximum input rate for Quadrant counting mode is 1 MHz, and for Pulse/Direction, CW/CCW counting modes is 4 MHz. The encoder/counter module is equipped a FRAM to retain the counter value after it is powered off. FRAM is a nonvolatile memory that can hold written data even after it is powered off. The data retention can be 10 years. And the feature can be configured as enabled or disabled.

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation Ethernet: 1500 VDC
I/O: 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
LED Indicators
Status Run, Ethernet
Counter/Frequency/Encoder Input
Channels 3-axis
Counter Mode Quadrant
CW/CCW
Pulse/Direction
Bits 32-bit
ON Voltage Level 5 V: +3.5 to +5 VDC
12 V with 1 kΩ External Resistor: +5 to +12 VDC
24 V with 2 kΩ External Resistor: +7 to +24 VDC
OFF Voltage Level +2 VDC (max.)
Individual Channel Configuration Yes
Max. Speed Quadrant mode: 1 MHz
CW/CCW mode: 4 MHz
Pulse/Direction mode: 4 MHz
Counter Value Retention 10 years
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP
Power
Reverse Polarity Protection Yes
Consumption 2.7 W
Powered from Terminal Block +10 to +30 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
ET-7083     CR Ethernet I/O Module with 3-ch Encoder/Counter Input (RoHS)
Datasheet Documents
TOP HOME