Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gague)+2 kênh DI/DO ICP DAS ET-7016 CR

Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gague)+2 kênh DI/DO ICP DAS ET-7016 CR

Ethernet I/O Module with 2-ch Strain Gauge Input, 2-ch DI and 2-ch DO

Tính năng

Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gague)+2 kênh DI/DO ICP DAS ET-7016 CR

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • Strain Gauge Input: 2 Channels
    • DI/Counter: 2 Channels
    • DO: 2 Channels
Chia sẻ:
Model: ET-7016 CR
Views: 683

Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gague)+2 kênh DI/DO ICP DAS ET-7016 CR

The ET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as alarm outputs. The ET-7016 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements.

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation Ethernet: 1500 VDC
I/O: 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
LED Indicators
Status Run, Ethernet
Digital Input/Counter
Channels 2
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +3.5 to +50 VDC
OFF Voltage Level +1 VDC (max.)
Max. Counts 4,294,967,295 (32-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection +70 VDC
Digital Output
Channels 2
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 to +50 VDC
Load Current 700 mA/channel
Overvoltage Protection +60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Power on Value Programmable
Safe Value Programmable
Strain Gauge, Load Cell Input
Channels 2 (Differential)
Type Strain Gauge,
Voltage,
Current
Range ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V
±20mA, 10 to 20 mA, 4 to 20 mA
Wiring Full-Bridge, Half-Bridge, Quarter-Bridge
Accuracy ±0.05%
Resolution 16-bit
Sampling Rate 10 samples/second (Total)
Impedance Voltage Input: >400 kΩ,
Current Input: 125 Ω
Individual Channel Configuration Yes
Overvoltage Protection +30 VDC
Zero Drift ±0.5 μV/°C
Span Drift ±25 ppm/°C
Commond Mode Rejection 150 dB (min.)
Nrmal Mode Rejection 100 dB
Excitation Voltage Output
Channels 1
Range 0 to 10 V
Accuracy ±0.05% of FSR
Max. Load Current 60 mA
Drift ±50 ppm/°C
Power on Value Programmable
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP
Power
Reverse Polarity Protection Yes
Consumption 2.9 W
Powered from Terminal Block +10 to +30 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
ET-7016     CR Ethernet I/O Module with 2-ch Strain Gauge Input, 2-ch DI and 2-ch DO (RoHS)
Datasheet Documents
TOP HOME