Trang chủ » Truyền thông công nghiệp » Fieldbus Communication » EtherCAT » Bộ chuyển đổi EtherCAT sang Modbus RTU và đồng hồ đo điện ICP DAS ECAT-2610-DW CR

Bộ chuyển đổi EtherCAT sang Modbus RTU và đồng hồ đo điện ICP DAS ECAT-2610-DW CR

EtherCAT to Modbus RTU and Power Meter Gateway

Tính năng

Bộ chuyển đổi EtherCAT sang Modbus RTU và đồng hồ đo điện ICP DAS ECAT-2610-DW CR

• Supports maximum 128 Input and Output Data
• Supports maximum 6 connection for PM-3033/3133
• 2 x RJ-45 bus interface, Integrate RS-232/422/485 serial device to EtherCAT
• Allows system integrators to retro-fit older automation devices into modern
• EtherCAT communication structures
• Supports blended to other Modbus slave
• Supports maximum Baud Rate 115200 bps

Chia sẻ:
Model: ECAT-2610-DW CR
Views: 2091

Bộ chuyển đổi EtherCAT sang Modbus RTU và đồng hồ đo điện ICP DAS ECAT-2610-DW CR

ECAT-2610-DW has EtherCAT to Modbus RTU gateway function, and can integrate smart meter slave devices such as PM-3033/3133/3114/3112 into EtherCAT control system through the special configuration file that provided by ICP DAS. And very easy to install and configure. The EtherCAT master can access RxPDO and TxPDO to connect multiple smart meter slave devices such as PM-3033/3133/3114/3112. It can achieve a more diversified energy management program.

 

 

 

Network Interface
Protocol EtherCAT
Communication Interface
RJ-45 Port RJ-45 x 1 Distance between Stations: Max. 100 m (100BASE-TX) Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e)
Serial Interface RS-232 The RS-232, RS-422 and RS-485 cannot be used simultaneously

  • TxD, RxD, GND
  • TxD+, TxD-, RxD+, RxD-
  • Data+, Data-
RS-422
RS-485
Power Input
Redundant Input Range +12 ~ +48 VDC
Power Consumption 0.1 A @ 24 VDC
Protection Power reverse polarity protection
Connector 3-Pin Removable Terminal Block (5.08mm)
Mechanical
Dimensions 110mm x 90mm x 33mm (H x W x D)
Installation DIN-Rail
Environmental
Operating Temperature -25 °C ~ + 75 °C
Storage Temperature -30 °C ~ + 80 °C
Ambient Relative Humidity 10 ~ 90% RH, non-condensing
ECAT-2610-DW     CR EtherCAT to Modbus RTU and Power Meter Gateway (RoHS)
Data Sheet icon_manual icon_software_indusoft
TOP HOME