Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module 96 kênh vào/ra số DIO AI ICP DAS e-D96S

Module 96 kênh vào/ra số DIO AI ICP DAS e-D96S

High Speed Bi-directional DIO Module, 96-channel, SCSI Ⅱ 96-pin Connector

Features

Module 96 kênh vào/ra số DIO AI ICP DAS e-D96S

  • 96 channels of Digital I/O
  • Bi-direction programmable I/O ports under software control
  • 3 32-bit bi-direction I/O ports
  • DIO operating voltage: +1.8 V, +2.5 V, +3.3 V, +5 V
  • Pull-high/Pull-low Jumpers for DI channels
  • Digital Pattern Generator for DO channels
  • Pattern-matching and change state Interrupt monitoring
  • Supports a High-density SCSI II 100-pin Connector
Chia sẻ:
Model: e-D96S CR
Views: 758

Module 96 kênh vào/ra số DIO AI ICP DAS e-D96S

The e-D96S is an e-Bus x 1 (similar to PCI-E x1) module that provides 96 Digital I/O lines that consist of three 32-bit bi-directional ports for use in a variety of Digital I/O applications. Each channel could be setting for Digital Input or Output. They provide a variety of operating voltage (+1.8 V, +2.5 V, +3.3 V and +5 V) for customers need. This module needs to be installed on an e-Bus x1 slot of the AXP-9000-IoT Programmable Automation Controller (PAC).

The pull-high/low jumpers on e-D96S module allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted. The e-D96S provides a single high-density connector that reduces the amount of installation space required for the module in the PAC.

The module installed on AXP-9000 with 64-bit Windows 10 IoT OS supports DLL SDK and Active X control together with various language sample programs based on Visual C++, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

Software
SDK LabVIEW Demo
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo

 

Bus Interface
Type e-Busx1

 

Hardware
Connector 1 x Female SCSI II 100-pin

 

LED Indicators
Status 1 x Power

 

Digital Input
Channels 96 (Bi-Direction)
Type 1.8 V/TTL, 2.5 V/TTL , 3.3 V/TTL, 5 V/TTL
ON Voltage Level 1.8V/TTL(Logic 1: 1.2 V Min.), 2.5V/TTL(Logic 1: 1.7 V Min.), 3.3V/TTL(Logic 1: 2.0 V Min.), 5V/TTL(Logic 1: 3.5 V Min.)
OFF Voltage Level 1.8V/TTL(Logic 0: 0.65 V Max.), 2.5V/TTL(Logic 0: 0.7 V Max.), 3.3V/TTL(Logic 0: 0.8 V Max.), 5V/TTL(Logic 0: 1.5 V Max.)
Response Speed 1 MHz (Typical)
Trigger Mode Software (Pattern Match, Change of Status)
Data Transfer Polling, Interrupt

 

Power
Consumption 600 mA @ +5 V

 

Mechanical
Dimensions (mm) 31 x 134 x 136 (W x L x H)

 

Environment
Operating Temperature -25 ~ +60 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 90 % RH, non-condensing
e-D96S     CR  High Speed Bi-directional DIO Module, 96-channel, SCSI Ⅱ 96-pin Connector (RoHS)
Datasheet Documents
TOP HOME