Trang chủ » Signal Conditioning Modules » Voltage Attenuator and Current Transformer » DNM-800 » Bộ chuyển đổi điện 1 kênh hạ áp (600V)+ 1 kênh biến áp (1000 A) ICP DAS DNM-831I-600V-1000A CR

Bộ chuyển đổi điện 1 kênh hạ áp (600V)+ 1 kênh biến áp (1000 A) ICP DAS DNM-831I-600V-1000A CR

1 Channel Voltage Attenuator (600V) and 1 Channel Current Transformer (1000 A) (Metal)

Features

Bộ chuyển đổi điện 1 kênh hạ áp (600V)+ 1 kênh biến áp (1000 A) ICP DAS DNM-831I-600V-1000A CR

• High Voltage Input and High Current Input Measurement
• Three Way Isolation
• Linear Attenuation Ratio
• High Input Impedance
• 3000 VDC Channel to Channel Isolation
• 4 kV ESD Protection
• 3 kV Surge Protection
• Easily wire connection

Chia sẻ:
Model: DNM-831I-600V-1000A CR
Views: 646

Bộ chuyển đổi điện 1 kênh hạ áp (600V)+ 1 kênh biến áp (1000 A) ICP DAS DNM-831I-600V-1000A CR

The DNM-831I-600V-1000A is 1-channel voltage attenuator and 1-channel current transformer. The maximum voltage input range is from ±600 V can be attenuated to ±10 V and the maximum current input range is from ±1000 A can be attenuated to ±10 V. It provides 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017, I-87017, M-7017RMS and I-87017W-RMS etc. to measure the high current.

EMS Protection
ESD (IEC 61000-4-2) ±4 kV contact for power line, input and output channels, ±8 kV air for random point
Surge (IEC 61000-4-5) ±3 kV for power liner
CT
Type Clip
Inside Diameter Φ40.5 mm
Leading Cable 1.5 m
Analog Input
Channels High Current: 1
High Voltage: 1
Type AC/DC Current
AC/DC Voltage
Range High Current: ±1000 A
High Voltage: ±600 VDC
Accuracy High Current: 1% of FSR
High Voltage: 1% of FSR
Bandwidth High Current: 0 ~ 50 KHz
High Voltage: 20 Hz ~ 20 kHz
Isolation High Current: 2.5 KV @ 50 (60) HZ/1 min
Analog Output
Channels High Current: 1
High Voltage: 1
Type AC/DC Current
AC/DC Voltage
Range • High Current: ±10 VDC or 10 VAC
• High Voltage: ±10 VDC or 10 VAC
Power
Input Range +10 VDC ~ +30 VDC
Consumption 1.8 W
Mechanical
Casing Metal
Dimensions (mm) 103 x 97 x 29 (W x L x D)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +75 °C
Humidity 10 ~ 90% RH, Non-condensing
DNM-831I-600V-1000A     CR 1 Channel Voltage Attenuator (600V) and 1 Channel Current Transformer (1000 A) (Metal) (RoHS)
Includes CA-040415-1 Cable and ASO-0024 Current Transformer

 

Data Sheet
TOP HOME