Trang chủ » Truyền thông công nghiệp » Serial Communication » Modbus Gateway » Bộ chuyển đổi RS-232/RS-485/USB sang DALI Gateway ICP DAS DGW-521 CR

Bộ chuyển đổi RS-232/RS-485/USB sang DALI Gateway ICP DAS DGW-521 CR

RS-232/RS-485/USB to DALI Gateway (RoHS)

Chia sẻ:
Model: DGW-521 CR
Views: 760

Bộ chuyển đổi RS-232/RS-485/USB sang DALI Gateway ICP DAS DGW-521 CR

The DGW-521 is a communication gateway between the Modbus RTU/DCON and the DALI (Digital Addressable Lighting Interface) protocols, and allows a Host PC, PAC, or TouchPAD to access DALI devices by providing three interfaces that enable conversion from RS-232/RS-485/USB to DALI. The module provides a built-in DALI power supply that can be enabled or disabled via a switch. DALI is an international standard for lighting control interfaces, and is suitable for DALI lighting systems covering small areas. The maximum length of the DALI signal cables cannot exceed 300 m.

EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal, ±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status PWR/RUN/ERR LED
COM Ports
Ports RS-485/RS-232
Baud Rate 200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Protocol DCON, Modbus RTU
USB
Specification USB 1.1 and USB 2.0 standard compatible
Transfer Speed 12M bps
Connector USB Type B
Driver Windows XP (32/64-bit), Windows 7 (32/64-bit)
Protocol DCON and Modbus RTU via Virtual COM port
DALI
Baud Rate 1200 bps
Isolation 1500 VDC
Built-in DALI power DC 16 VDC ± 5%, max. current 250 mA (Enabled/Disabled via a switch)
Power
Consumption 6 W
Mechanical
Casing Plastic
Dimensions (mm) 107 mm x 72 mm x 57 mm (L x W x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
DGW-521     CR  RS-232/RS-485/USB to DALI Gateway (RoHS)
TOP HOME