Trang chủ » Accessories » Daughter Boards » Bo mạch DIO 24 kênh đầu ra Relay với Din-rail ICP DAS DB-24SSRDC/DIN CR

Bo mạch DIO 24 kênh đầu ra Relay với Din-rail ICP DAS DB-24SSRDC/DIN CR

24-ch DC-Type Solid-State Relay Board with DIN-rail Mounting

Chia sẻ:
Model: DB-24SSRDC/DIN CR
Views: 699

Bo mạch DIO 24 kênh đầu ra Relay với Din-rail ICP DAS DB-24SSRDC/D/DIN CR

The DB-24SSR/DB-24SSRDC includes 24 normally open, or form A, solid-state relays The board interface to filed logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the DB-24SSR/DB-24SSRDC to switch high voltage load, up to 240 VAC/50 VDC and up to 4 A. The relay is energized by applying a 5-voltage signal to the appropriate relay channel on the 50-pin header or 37-pin D-sub connector. Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated. Because there is a D-sub 37-pin connector on the board, the user may use it to interface to any TTL output board. In other words, the user may use it as a general purpose solid state relay output board.
Relay Output
Channels 24 X FORM A
Type SSR
Contact Rating 4 A @ 3~50VDC
Operate Time 1/2 cycle of voltage sina wave 1ms (max)
Electrical Endurance Long Life, No Arcing, No Bounce, No Switching Noise
Power
Consumption 0.4 A @ +5 V (max.)
Mechanical
Dimensions (mm) 130 mm x 220 mm x 32 mm (W x L x H)
Installation DIN-rail mounting
Environmental
Operating Temperature 0 ~ 60°C
Storage Temperature -20 ~ 70°C
Humidity 5% ~ 90% RH, non-condensing
  • On/off control
  • Energy management
  • Test Automation
  • Process Control
DB-24SSRDC/DIN 24-ch DC-Type Solid-State Relay Board with DIN-rail Mounting
Include: CA-5015 (Flat Cable, 50-pin, 1.5 M)

 

TOP HOME